ING_TRC Piggyback Board

The GigaSTaR piggyback board ING_TRC represents an easy-to-use implementation of a full duplex GigaSTaR High Speed link with 2.64 Gbit/s (330 Mbyte/s) bandwidth.

The ING_TRC comes equipped with the GigaSTaR INGT165B/INGR165B Transmitter and Receiver and a few other external components. This board offers all the functionality to be directly connected to a plain 2x36bit, 33 Mhz parallel Interface through a compact 140-pin connector. The duplex high-speed serial signals are available at a SUB D9 connector, which is directly mounted on the piggyback board with the pin out being compatible to the industry standard Shielded Twisted Pair (STP) cables. Due to its compact size and variable distance of 6-14 mm to the main board, this piggyback can be easily adapted to any system environment.

Features:

• Equipped with GigaSTaR INGT165B/INGR165B Transmitter and Receiver (Copper)
• 64 x 59 mm
• Compact size of 64 x 59 mm
• 297 Mbyte/s payload data rate
• Parallel Tx/Rx-Interfaces (each 36 bit @ 33 Mhz)
• Mounted Sub D9 receptacle for connection to the STP cables
• 140 pin, 0.8 mm pitch Free-Height Connector
• On-board reference clock
• Full AC-coupling to the serial link cable
• Multilayer board for highest EMI-immunity
• Single 3.3V DC-supply

Application Kit Block Diagram: