Network Anything. Network Everything. Lantronix.
Lantonix's CM100-E0000B CoBox-Mini100 Embedded Device Server is a board-only Device Server which provides OEM customers and design engineers with the means to network-enable their products via the same IP protocol stack found on other Lantronix CoBox products.
The CoBox Mini supports a wide variety of network configurations and features for Ethernet network connectivity.
Serial interfaces are accomplished via TTL connectors with full modem and hardware flow control signals support. The CoBox-Mini100 Embedded Device Server auto-senses network speeds of 10Mbps or 100Mbps.
With the CoBox-Micro, the CoBox-Mini, and now the CoBox-Mini100, the CoBox family, Lantronix offers the Embedded Device Server customer a full range of networking solutions.
Highlights
- 10/100BASE-T Ethernet network interface
- Second 10/100BASE-T Ethernet interface to be used in noisy and harsh environments
- Internal Java-based HTTP interface for ease of configuration and management
- Encryption for higher security required for certain critical application devices
- Full featured serial TTL interfaces (two channels) supprting modem and hardware flow control signal manipulations
Features / Specifications
Supported Protocols |
ARP, UDP, TCP, Telnet, ICMP, SNMP, DHCP, TFTP, and HTTP |
Compatibility |
Ethernet: Version 2.0/IEEE 802.3 |
Network Interface |
10/100BASE-T |
Serial Interface |
2 TTL serial interfaces
Power reset pin
RxD/TxD
RTS/CTS/DCD
DTR line
Three status lines (for LEDs) |
Serial Line Formats |
Characters: 7 or 8 data bits
Stop bits: 1 or 2
Parity: odd, even, none |
Modem Controls |
DTR (TTL level) |
Flow Control |
XON/XOFF
CTS/RTS
None |
Management |
Internal Web Server
SNMP (read only)
Serial login
Telnet login |
System Software |
Flash ROM standard: new software can be downloaded from a TCP/IP host (TFTP) or over serial port |
Diagnostic LEDs |
Good Link
Port Status
Diagnostics |
Power Requirements |
5V regulated, 650mA |
|
