UDS-10B Embedded Device Server

UDS-10B Highlights

Flexible and well-developed IP protocol stack
Support for RS232 or RS485 serial connections via DB-25 serial port
10 Mb/s Ethernet through the RJ-45 connector
128-bit encryption for the maximum level of security
Configurable via Internal Web server, SNMP, DHCP, or Telnet
Flash ROM for easy software upgrades

Remotely Monitor, Manage and Share Connected Devices Over a Network or the Internet

The UDS-10B Device Server enables nearly any device to communicate over the Internet and shared networks, and it allows those devices to be remotely monitored, managed, and controlled. The UDS-10B is designed to be integrated onto the circuit board of devices like factory machinery, security systems, heating and ventilation systems, lighting control systems and Point-of-Sale devices.

For OEMs, system integrators and design engineers, the UDS-10B offers an easy-to-implement solution across almost any network, providing distributed intelligence to thousands of devices.

Using the UDS-10B eliminates the need for OEMs and systems integrators to invest engineering resources to develop similar networking solutions and reduces the time it takes to bring intelligent devices to market.

The UDS-10B replaces expensive dedicated PCs or lengthy serial cables with fast and reliable networking technology, and brings several new features and enhancements to the embedded product line:

Features / Specifications

Supported Protocols	ARP, UDP, TCP, Telnet, ICMP, SNMP, DHCP, TFTP, and HTTP
Device Support	Supports any asynchronous serial device with 7 or 8-bit data, with or without parity, requiring Ethernet access
Network Interface	RJ45 (10BASE-T) Ethernet
Serial Interface	Female DB25 RS-232/RS485 serial port with DCE configuration
Data Rates	Serial speeds 300 bps up to 115 Kbps
Flow Control	Software XON/XOFF Hardware CTS/RTS
Modem Controls	RTS, CTS, DSR, DCD, DTR
Management	Internal Web server SNMP (read only) Serial login Telnet login
System Firmware	Flash ROM standard; downloadable from a TCP/IP host (TFTP) or over the serial port
LEDs	Good Link (green) Network transmit/Receive data (yellow) Collisions (red) Diagnostic (red) Status (green)
Physical Dimensions (H x W x D)	0.55 x 2.3 x 3.3 in (1.4 x 5.8 x 8.4 cm) Weight: 0.12 lbs (54 g)
Power Requirements	9-30 VDC 140 mA max. (Power supply not included)
Environmental	Operating Temperature 5 to 50°C (41 to 122°F) Storage Temperature -40 to 66°C (-40 to 151°F)

Board Layout

Connector Point