This page has an updated version.

Please click here to see it

Xport and XPortAR Embedded Device Servers from Lantronix

XP3002000-01R
XPort AR Device Server - Ext Temp- RoHS Compliant

XP300200K-01
XPortAR Evaluation Kit

XP3002000-01
XPort AR Device Server - Ext Temp

XP1001000-03R
XPort Device Server - Ext Temp- RoHS Compliant

XP1001001-03R
XPort Device Server - Comm Temp - RoHS Compliant

XP1002000-03R
XPort Device Server - Ext Temp w/Encryption - RoHS Compliant

XP1002001-03R
XPort Device Server - Commercial Temp w/Encryption - RoHS Compliant

XP1004000-03R
XPort RS485 Device Server - Ext Temp w/Encryption - RoHS Compliant

XP100200K-03
XPort Device Server
Evaluation Kit

XPort Highlights

Easily network-enable any product
Fastest time-to-market
Compact RJ-45 Package
Flexible,well-developed IP protocol stack
Ethernet RJ45 (10/100Base-T) connector on the board
Real time device status
Email Alerts
Remote command and control of edge devices
TTL serial interface
Accepts 3.3VDC regulated input power
HTTP, Serial, Telnet and SNMP management
Flash ROM for easy software upgrades
Custom protocol support available

Lantronix XPort Embedded Device Servers - Just Add Applications

Web Enable any Edge Device with a Serial Interface

Shaping a new category that encapsulates networking, connectivity, communications and much more, the XPort™ family of products makes possible a world where Internet enabled devices are the rule, not the exception. And with Internet connectivity, an immense amount of potentially valuable information becomes reachable and controllable for a wide range of electronic, industrial and consumer products. Simply imagine today's popular products being Internet-enabled such as vending machines, refrigerators, utility meters, HVAC systems, and home entertainment systems. The XPort makes that possible.

The XPort™ embedded device server from Lantronix is a complete network enabling solution enclosed within a ruggedized RJ-45 package. The XPort empowers original equipment manufacturers (OEMs) to quickly and easily go to market with networking capabilities built into their products. Smaller than the average person’s thumb, the XPort embedded device server dramatically cuts the typical internal development cycle for adding networking capabilities from 6 to 9 months down to as little as 60 days.

As the demand for device connectivity increases exponentially, Lantronix removes the complexity manufacturers face by incorporating all the required hardware and software inside a single embedded solution. The XPort incorporates all essential networking features, including a 10Base-T/100Base-TX Ethernet connection, a proven operating system, an embedded Web server, e-mail alerts, a full TCP/IP protocol stack and 128-bit AES encryption for secure communications.

XPort Features & Benefits

Features	Benefits
The ONLY Completely Integrated Solution	Fastest time to market with the least amount of risk
EMC Compliant	No FCC certifications issues when adding networking
The Device Server in an RJ-45 Form Factor - an Industry First	Reduced cost for PCB's. Enables smaller form factor devices to be networked
Extended Operating Temperature: -40 to +85 C	Capable of operating in extreme environments
10/100Base-T Ethernet - Auto Sensing	Supports high speed networks with backward compatibility
Embedded Web Server	Edge devices can be accessed from a standard web browser anywhere in the world
Interactive Web Pages Through the Use of Java Applets	Uses industry standard Java
Easy Configuration through a standard Web Browser	Do not need to load or learn a new application program to configure XPort
Easy Customization of HTML Web Pages	Allows OEMs to provide custom look and feel to their product
E-Mail Notification	Real time notification and alarm processing through device generated email alerts
Password Protection	Prevents unauthorized access
Firmware Upgrades Over the Internet	No on-site support required
Rijndael Encryption	128-bit AES Government approved secure communications
CPU Acts as a System Co-Processor	Offloads intensive network activity from the host
3.3V power requirements	Low power consumption
Serial to Ethernet interface	Almost all devices have a serial interface

XPort Specifications

Serial Interface
Interface:	CMOS (Asynchronous)
Data Rates:	300 to 230 kbps
Characters:	7 or 8 data bits
Parity:	odd, even, none
Stop Bits:	1 or 2
Control Signals:	RTS, CTS, DTR, DCD
Flow Control:	XON/XOFF, RTS/CTS
Programmable I/O:	3 PIO pins (Software selectable)
Network Interface
Interface:	Ethernet 10Base-T or 100Base-TX (Auto-Sensing)
Connector:	RJ45
Protocols:	TCP/IP, UDP/IP, ARP, ICMP, SNMP, TFTP, Telnet, DHCP, BOOTP, HTTP, and AutoIP
Indicators (LED)
10Base-T connection
100Base-TX connection
Link & activity indicator - Full/half duplex
Management
SNMP, Telnet, serial, internal web server, and Microsoft Windows® based utility for configuration
Security
Password protection
Optional 128-bit AES US Govt. approved Rijndael encryption
Internal Web Server
Serves web pages and Java applets
Storage capacity:	384Kbytes
Architecture
CPU:	Based on the DSTni-LX enhanced 16-bit, 48MHz, x86 architecture
Memory:	256Kbytes SRAM and 512Kbytes flash
Firmware:	Upgradeable via TFTP and serially
Power
Input voltage:	3.3 VDC
Input current:	210 mA max.
EMI Compliance
Class B limits of EN 55022:1998
Environmental
Operating:	-40° to 85°C (-40° to 185°F)
Storage:	-40° to 85°C (-40° to 185°F)
Packaging
Dimensions:	33.9x16.25x13.5mm (1.33x.64x.53 inches)
Weight:	9 grams (0.32 oz)
Included Software
MS Windows® based software device installer and MS Windows based Comm Port Redirector

XPort Block Diagram

Click to Enlarge