Nordic Semiconductor's nRF9E5 Multiband Transceiver is a true single chip system with fully integrated RF transceiver, 8051 compatible microcontroller and a 4 input 10bit 80ksps AD converter. The transceiver of the system supports all the features available in the nRF905 chip including ShockBurst™, which automatically handles preamble, address and CRC. The circuit has embedded voltage regulators, which provides maximum noise immunity and allows operation on a single 1.9V to 3.6V supply. nRF9E5 is compatible with FCC standard CFR47 part 15 and ETSI EN 300 220-1.
nRF9E5 Features
- nRF905 433/868/915MHz transceiver
- 8051 compatible microcontroller
- 4 input, 10bit 80ksps ADC
- Single 1.9V to 3.6V supply
- Small 32 pin QFN (5x5mm) package
- Green lead-free package
- Extremely low cost Bill of Material (BOM)
- Internal VDD monitoring
- 2.5µA standby with wakeup on timer or external pin
- Adjustable output power up to 10dBm
- Channel switching time less than 650µs
- Low TX supply current, typical 11mA @-10dBm
- Low RX supply current, typical 12.5mA peak
- Low MCU supply current, typ. 1mA at 4MHz @3volt
- Suitable for frequency hopping
- Carrier Detect for "listen before transmit protocol"
nRF9E5 Benefits
- Close integration of RF, 8051 MCU, ADC and peripherals
- Protocol pre-processing on-chip
- Low threshold for software development
- Ready made SW and HW examples available
- Supported by advanced 3rd party SW tools
- No trimming in production
- Smallest available BOM and footprint
- No need for external SAW filter
- Fulfills current and future regulations on Green electronics
nRF9E5 Applications
- Sport and leisure equipment
- Alarm and security system
- Industrial sensors
- Remote control
- Surveillance
- Automotive
- Telemetry
- Keyless entry
- Toys
| NRF9E5 -
1.9-3.6V TRANCEIVER W/ MCU/ADC/PWM |
|
Data Sheet |
| NRF9E5-EVKIT -
EVAL KIT 868-915 MHZ (2 X NRF9E5 BOARDS) |
|
Data Sheet |
|
