Bluetooth Evaluation Kits from Bluegiga

Back to Top

WT12 Class 2 Bluetooth Module Evaluation Kit

WT12 Bluetooth Module features:

• Class 2, Bluetooth 2.0+EDR compatible WT12 module
• Unregulated power supply input form 5V to 9V
• RS-232 serial interface
• USB interface
• SPI for upgrading the firmware and parameters
• Reset and DSR buttons
• 2,5mm audio jacks for speaker and microphone
• 16 pin I/O interface
• iWRAP™ command interface software (this firmware can be changed to example HCI with OnBoard Installation kit that comes with)

WRAP Access Server Software Development Kit

WRAP Access Server Software Development Kit (SDK) from Bluegiga enables application development into Bluegiga's WRAP 229x Access Server platform. The SDK offers simple and lightweight Linux based development and compiler environment spiced up with sample applications and documentation.

WRAP THOR 2022-1 Bluetooth Module Evaluation Kit

2022-1 Evaluation Kit contains:

• One WRAP THOR 2022-1 evaluation board
• CD (Design references and needed software)
• Documentation
• Serial cable and power adapte

WRAP THOR 2022-1-B2B Bluetooth Module Evaluation Kit

2022-1-B2B Evaluation Kit contains:

• One WRAP THOR 2022-1-B2B Bluetooth Module Evaluation Board with
  2022-1-B2B Bluetooth Module
• CD (Design references and needed software)
• Documentation
• Serial cable and power adapter

nRF2401 Wireless Transceiver Evaluation Kit

nRF2401-EVKIT Contents:

• 2 - nRF2401 Evaluation Boards with the nRF2401 Transceiver
• 2 - nRF Configuration Boards for PC Interface
• 2 - 2.4GHz Half Wave Antennas
• nRF240x Configurator Documentation
• nRF2401 EVBOARD Documentation
• nRF240x Configurator: Configuration and Control Software for PC

nRF24E1 Wireless Transceiver Evaluation Kit

nRF24E1-EVKIT Contents:

• 2 - nRF24E1 Evaluation Boards
• 2 - EEPROM Programmer and Emulator Boards
• 2 - 2.4GHZ Half Wave Antennas
• 2 - Male A/B USB Cables
• CD ROM with Software and Documentation

nRF24AP1 Wireless Transceiver Evaluation Kit

Integrate Nordic's brand new 2.4GHz Ultra-Low Power Transceiver quickly and easily with the nRF24AP1-EVKIT

nRF24AP1 BENEFITS

• Ultra-Low Power Consumption
• Extremely Low Cost Bill of Materials (BOM)
• Small Size - 5x5mm
• Easy-to-Use Serial Interface

nRF9E5 Wireless Transceiver Evaluation Kit

nRF9E5-EVKIT Contents:

• 2 nRF9E5 Evaluation Boards
• 2 EEPROM programmer and emulator boards
• 2 standard male USB A/B cables
• 2 flexible 1/4 wave monopole antennas
• Documentation CD

nRF24Z1 Wireless Audio Streamer Evaluation Kit

Quickly and easily integrate CD-Quality Streaming Audio into your new or existing applications using Nordic's nRF24Z1-EVKIT

CD-Quality Audio that's Immune to Interference

XPort Device Server Development Kit from Lantronix

XPort Development Kit Contents

• XPort Evaluation Board
• XPort Device Server
• +5VDC Universal Power Supply with Snap-Fit Plugs for different Countries
• RS-232 Cable, DB9M/F
• Cat5e UTP RJ45M/M Ethernet Cable
• CD with Software Utilities and Documentation
• Serial Adaptor - 25-pin to 9-pin

WiPort Embedded Device Server Development Kit from Lantronix

WiPort Development Kit Contents

• WiPort Evaluation Board
• WiPort Device Server
• 3.3V Power Supply
• RS-232 Cable, DB9F/F, Null Modem
• Cat5e UTP RJ45M/M Ethernet Cable
• CD with Software Utilities and Documentation
• Antenna

GBIC Optical Transceiver Evaluation Board from Fiberxon

Fiberxon's FVB-001 GBIC Evaluation Board is the ideal way to test and evaluate Fiberxon GBIC Transceivers. The FVB-001 GBIC Evaluation Board is compatible with all types of GBICs including long wavelength, short wavelength and copper GBICs.

SFP Optical Transceiver Evaluation Board from Fiberxon

Fiberxon's FVB-002 SFP Evaluation Board is the best way to test and evaluate Fiberxon's Small Form Factor Pluggable (SFP) optical transceivers. The FVB-002 is compatible with short wavelength and long wavelength SFP transceivers for use at data rates from 1.06 Gbit/sec to 2.5 Gbit/sec.

SFF Optical Transceiver Evaluation Boards from Fiberxon

The FVB-006 & FVB-007 Evaluation Boards from Fiberxon are specifically designed to test and evaluate the optical Small Form Factor (SFF) transceiver modules for data rates from 100Mbps up to 2.5Gbps. The FVB-006 & FVB-007 Evaluation Boards accept both the pins of a 2x5 or 2x10 SFF optical transceievers.

ING_AK Application Kit from Inova Semiconductors

Inova's ING_AK Application Kit is a versatile and modular evaluation kit used to easily adapt the 1.32 Gbit/s high-speed GigaSTaR link to any system environment or to evaluate the link under specific and predefined conditions. The ING_AK evaluation kit supports uni- and bi-directional transmissions as well as a so-called “loop back” mode to configure a complete link with one evaluation kit.

ING_AK2 Application Kit from Inova Semiconductors

Inova's ING_AK2 Application Kit is a versatile and modular evaluation kit used to easily adapt the 1.32 Gbit/s high-speed GigaSTaR link to any system environment or to evaluate the link under specific and predefined conditions. The ING_AK evaluation kit supports uni- and bi-directional transmissions as well as a so-called “loop back” mode to configure a complete link with one evaluation kit. The Twin Kit ING_AK2 allows full duplex 1.32 Gbit/s transmissions between the two main boards.

IND330_AK Application Kit from Inova Semiconductors

5.7” GUI Starter Kit from Amulet Technologies

The 5.7" Amulet-on-Board Starter Kit includes a 5.7" Amulet-on-Board Blue Mode Module with integrated touch screen and LED backlight. In addition, you will receive the Amulet compiler software, serial cable, program interface board, 5V power supply and stylus.

3.8” GUI Starter Kit from Amulet Technologies

The 3.8” starter kit supersedes STK-GT320. It includes the 3.8” Blue Mode module (QVGA monochrome display with a six ultrabright LED backlight, a fully integrated analog touch panel, and integrated Amulet Controller Board). In addition, you will receive the Amulet Compiler Software, a serial cable, stylus, and 5vDC power supply.

ASM2516EVAL-KIT EMI Reduction Evaluation Kit from Alliance Semiconductor

The ASM2516 EMI Reduction Evaluation Kit is designed specifically for a full and complete evaluation of the Alliance Semiconductor AS80M2516A Dual PLL based EMI Reduction clock synthesizer/generator. The AS80M2516A is designed to reduce electromagnetic interference (EMI) at the clock source, allowing system wide reduction of EMI of all clock dependent signals.