The XPort Device Server w/RJ-45 Networking from Lantronix

A complete network-enabling solution enclosed within a compact RJ-45 package.

•Fastest Time to Market
•Compact RJ-45 Package
•Remote Command and Control
•Real Time Device Status
•Email Alerts

The XPort Device Server w/RJ-45 Networking from Lantronix

A complete network-enabling solution enclosed within a compact RJ-45 package.

•Fastest Time to Market
•Compact RJ-45 Package
•Remote Command and Control
•Real Time Device Status
•Email Alerts

Lantronix CoBox Mini Embedded Device Server

Lantronix CoBox Mini 100 Embedded Device Server

The CoBox Mini 100 Embedded Device Server from Lantronix is a board-only product which provides OEM customers and integrators with the means to network-enable their products using the same IP protocol stack found on other Lantronix CoBox products. It supports a wide variety of configurations and features for Ethernet network connectivity. Serial interfaces are accomplished via TTL connectors with full modem and hardware flow control signals support. The CoBox-Mini100 from Lantronix auto-senses network speeds of 10Mbps or 100Mbps.

Lantronix CoBox Micro Embedded Device Server

The CoBox Micro Embedded Device Server from Lantronix is a board level product for OEM users who want to embed proven mainstream Ethernet connectivity into products quickly and economically. The CoBox Micro can easily fit into almost any size device that would benefit from integrated network connectivity. Serial interfacing is accomplished via a TTL connector and for Ethernet access; an RJ45 (10BASE-T) is available. The CoBox Micro supports the same IP protocol stack found on the other Lantronix CoBox products.

• CO-E1-00AA No RJ45, No LED’s
• CO-E1-11AA 1 Serial Port, RJ45, & LED’s
• CO-E1M-11AA MODBUS Firmware
• CO-E2-110AA W/O TTL Header
• CO-E2-113AA TTL Header, 2 Ports
• CO-E2-11AA 2 Serial Ports

Lantronix UDS-10B Device Server

The UDS-10B Device Server from Lantronix enables nearly any device to communicate over the Internet and shared networks, and it allows those devices to be remotely monitored, managed, and controlled. The UDS-10B is designed to integrate into the circuit board of devices such as factory machinery, security systems, heating and ventilation systems, lighting control systems and Point-of-Sale devices.

Lantronix UDS-100B Device Server

The UDS-100B Device Server from Lantronix connects serial devices to IP-based Ethernet networks quickly and easily. The UDS100-B encapsulates serial data into packets and transports it over Ethernet. Using two UDS100s, connected by a network, virtual serial connections can be extended across a facility or around the world.

GBIC Optical Transceiver Evaluation Board from Fiberxon

Fiberxon's FVB-001 GBIC Evaluation Board is the ideal way to test and evaluate Fiberxon GBIC Transceivers. The FVB-001 GBIC Evaluation Board is compatible with all types of GBICs including long wavelength, short wavelength and copper GBICs.

SFP Optical Transceiver Evaluation Board from Fiberxon

Fiberxon's FVB-002 SFP Evaluation Board is the best way to test and evaluate Fiberxon's Small Form Factor Pluggable (SFP) optical transceivers. The FVB-002 is compatible with short wavelength and long wavelength SFP transceivers for use at data rates from 1.06 Gbit/sec to 2.5 Gbit/sec.

SFF Optical Transceiver Evaluation Boards from Fiberxon

The FVB-006 & FVB-007 Evaluation Boards from Fiberxon are specifically designed to test and evaluate the optical Small Form Factor (SFF) transceiver modules for data rates from 100Mbps up to 2.5Gbps. The FVB-006 & FVB-007 Evaluation Boards accept both the pins of a 2x5 or 2x10 SFF optical transceievers.

XPort Device Server Development Kit from Lantronix

XPort Development Kit Contents

• XPort Evaluation Board
• XPort Device Server
• +5VDC Universal Power Supply with Snap-Fit Plugs for different Countries
• RS-232 Cable, DB9M/F
• Cat5e UTP RJ45M/M Ethernet Cable
• CD with Software Utilities and Documentation
• Serial Adaptor - 25-pin to 9-pin