• nRF24L01+™ compatible RF Transceiver
• Worldwide 2.4GHz ISM band operation
• Up to 2 Mbps on air data rate
• Enhanced ShockBurst™ hardware link layer
• On air compatible with nRF24LE1, LU1, L01+, L01, nRF2401A, 02, E1 and E2
• Low cost external ±60ppm 16MHz crystal
• Full speed USB 2.0 compliant device controller
• Up to 12 Mbps USB transfer rate
• 2 control, 10 bulk/interrupt and 2 ISO endpoints
• 512 bytes dedicated USB endpoint buffer RAM
• Software controlled on-chip pull-up resistor for D+
• Integrated PLL for full-speed USB operation
• On chip Voltage regulators, 4.0 to 5.25V supply range
• Enhanced 8-bit 8051 compatible microcontroller
• Reduced instruction cycle time
• 32-bit multiplication-division unit
• 16 or 32 Kbytes on-chip flash memory
• 2 Kbytes SRAM
• 6 general purpose digital input/output pins
• Hardware SPI and UART
• 3 16-bit timers/counters
• 128 bit AES encryption/decryption co-processor
• Supports flash programming and upgrades over USB
• Supports nRFprobe and FS2 hardware debuggers
• Compact 32-pin 5x5mm QFN package
• nRFgo compatible development kit

• Fully featured ultra low power nRF24L01+™ 2.4GHz transceiver core
• Worldwide 2.4GHz ISM band operation
• Enhanced ShockBurst™ hardware link layer
• 250 kbps, 1 Mbps and 2 Mbps on-air data rate options
• Air compatible with nRF24L01; nRF24L01+; nRF24LU1, and nRF2401A, -02, -E1 and -E2
• Low cost external+/-60ppm 16MHz crystal
• Enhanced 8-bit 8051 compatible microcontroller
• 32-bit multiplication-division unit
• AES encryption/decryption accelerator
• 16 kbytes on-chip flash memory
• 1 kbyte on-chip data flash memory
• 512 bytes high-endurance data flash memory
• 1 kbyte on SRAM plus 256 bytes of IRAM
• Low power 16MHz crystal and RC oscillators
• Ultra low power 32kHz crystal and RC oscillators
• Flexible real-time counter and three 16-bit timers/counters
• Ultra low power analog comparator for system wake-up
• Rich set of digital interfaces including: SPI master/slave, 2-wire master/slave, and UART
• 2-channel PWM
• Programmable resolution ADC: 6, 8, 10, or 12-bits
• Random Number Generator based on thermal noise
• Supports the Nordic nRFProbe hardware debugger
• Programmable generic I/O pins
• Three package options:
• 4x4mm 24-pin QFN (7 Generic I/O pins)
• 5x5mm 32-pin QFN (15 Generic I/O pins)
• 7x7mm 48-pin QFN (31 Generic I/O pins)

nRF24LU1+™ Development Kit

The nRF24LU1+™ Development Kit comes in only one version, fitted with nRF24LU1P-F32Q32 (32 kbytes flash memory) devices. The kit include nRFgo compatible nRF24LU1+™ radio modules, a production ready USB dongle, complete Software Development Kit (SDK) and the nRFprobe hardware debug utility.

nRF24LE1™ Development Kit

The nRF24LE1™ Development Kit comes in three versions: one for each package variant. These include the nRF24LE1™ radio modules, complete Software Development Kit (SDK), and nRFProbe hardware debug support.

nRFgo Starter Kit

The nRFgo Starter Kit provides a generic development platform for all nRF devices providing motherboards with sockets for the nRFgo development kit modules as well as the nRFgo Studio evaluation and management PC application

nRFgo Starter Kit

The nRFgo Starter Kit provides a generic development platform for all nRF devices providing motherboards with sockets for the nRFgo development kit modules as well as the nRFgo Studio evaluation and management PC application