WT11 Class 1 Bluetooth Module

WT11 Bluetooth Module Features:

• Bluetooth® Class 1
• Fully qualified end product with Bluetooth® 2.0+EDR, CE and FCC**
• Two antenna options: internal chip antenna or U.FL connector
• Enhanced Data Rates (EDR) with data throughput up to 2-3Mbps
• Support for Adaptive Frequency Hopping (AFH) and 802.11 co-existence
• USB version 2.0 compliant
• UART with bypass mode
• 8MB of integrated flash memorySupported profiles: SPP, DUN, OBEX and HCI*
• Support for custom applications
• Industrial temperature range from -40C to +85C
• RoHS compliant
• Pin-to-pin compatible with Bluegiga WT12 module
• Simple iWRAP™ firmware for controlling Bluetooth® wireless technology

WT11 Bluetooth module Applications:

• Point-of-Sales systems
• Bar code and RFID scanners
• Medical measurement and data transfer systems
• Automotive inspection and measurement systems
• Telemetry and machine-to-machine interfaces
• PDAs and other portable terminals
• Industrial PCs and Laptops

WT11-A-AI
WT11 Module w/Antenna

WT11-A-HCI
WT11 Module w/Antenna

WT11-E-AI
WT11 Module w/U.FL Antenna Connector and iWRAP Software

WT11-E-HCI
WT11 Module w/U.FL Antenna Connector

EKWT11-A
WT11 Evaluation Kit with iWRAP Firmware

EKWT11-E
WT11 Evaluation Kit with HCI Firmware

WRAP Access Server - Product Change Notification

Description:

WT11 is a next-generation, class 1, Bluetooth® 2.0+EDR (Enhanced Data Rate) module. It introduces three times faster data rates compared to existing Bluetooth® 1.2 modules even with lower power consumption! WT11 is highly integrated and sophisticated Bluetooth® module, containing all the necessary elements from Bluetooth® radio to antenna and a fully implemented protocol stack. Therefore WT11 provides an ideal solution for developers who want to integrate Bluetooth® wireless technology in to their design with limited knowledge of Bluetooth® and RF technologies.

WT11 module combined with Bluegiga's complete development, testing and verification service offering and excellent developer support, OEMs and designers ensure that their products reach the market rapidly and cost-effectively in relation to time and resources. Bluegiga has in-house knowledge of both software and hardware offering customers a single point of contact to all Bluetooth® related issues.

Software:

By default WT11 module is equipped with powerful and easy-to-use iWRAP firmware. iWRAP enables users to access Bluetooth functionality with simple ASCII commands delivered to the module over serial interface - it's just like a Bluetooth modem. Entering the world of wireless Bluetooth® technology could not be easier!

With iWRAP software you have several implementation options:

• iWRAP can be configured to operate autonomously - just like a Bluetooth cable replacer
• To create sophisticated applications - a host system can be used to control iWRAP with ASCII commands
• The GPIO interface in WT11 module can be used to connect host and iWRAP
  

Besides the iWRAP firmware Bluegiga also offers several other firmware options for WT11 module. Standard Host Command Interface (HCI) firmware is supported and an ideal solution for systems where the host system is capable running the entire Bluetooth® stack and profiles and WT11 is utilized as low radio over UART or USB interface.

Bluegiga also provides custom firmware services, eliminating the need for customers to perform firmware or parameters installation on production line, reducing significantly the production cost, time and complexity.