Highside Switch

Manufacturer:
MFG Part #:

iC-DP SOT23-6L

Part #:
IC-DPSOT23-6L
Availability:
Short Lead Time
RoHS Status:
$1.05
Qty:
Minumum Qty: 3000

Need a lower quantity?
Ask a Question
Call Me
Email This Page
 
 

Product Information

iC-DP is a monolithic highside switch for ohmic, inductive and capacitive loads. Designed for a wide input voltage range of 4 to 36 V, it is capable of supplying a minimum output current of 200 mA. The output acts as a current source with a low saturation voltage; protection against shortcircuiting is provided by the device shutting down with excessive temperature. The chip is activated when the input voltage threshold V(PI)-V(NI) of typically 3.5 V is exceeded. When used as a 4-pin element (with the SOT23-6L package only), the input (PI, NI) and output (DP, VP) reference voltages are decoupled. The maximum permissive voltage difference between VP and PI is 36 V.
 

Features

200 mA of output current
36 V highside switch/level shifter
3-pin configuration possible
4 to 36 V input voltage range
Decoupling of input and output reference voltages (SOT23-6L) permits control by 5V logic
Input with hysteresis
On-chip overtemperature protection with hysteresis
Output with an active freewheeling circuit
Package option: (SOT223-4L, SC59-3L, DFN, CSP)
p-channel output driver without charge pump for short activation time
Short-circuit protected
Wide temperature range of -40 to 120 C
 

Documents

Previously Viewed Products

Highside Switch
Part #: iC-DP SOT23-6L
Highside Switch