13-Bit Sin/D Converter with Calibration
| Manufacturer: |
|
iC-Haus
|
| MFG Part #: |
|
iC-NQ TSSOP20
|
| Part #: |
|
|
| Availability |
|
Usually Ships Same Day
|
| RoHS Status: |
|
|
|
|
|
Product Brief
Datasheet
Package Info
- 250 kHz input frequency
- A QUAD B incremental outputs with selectable minimum transition distance (e.g. 0.25 s for 1 MHz at A)
- Binary and decimal resolution settings, e.g. 500, 512, 1000, 1024; programmable angle hysteresis
- Conversion time of just 250 ns including amplifier settling
- Count-safe vector follower principle, realtime system with 70 MHz sampling rate
- Direct sensor connection; selectable input gain
- ESD protection and TTL-/CMOS-compatible outputs
- Fast 24-bit on-chip multiturn counter
- Fault monitoring: frequency, amplitude, configuration (CRC)
- Front-end signal conditioning features offset (8 bit), amplitude ratio (5 bit) and phase (6 bit) calibration
- Fully re-programmable by BiSS interface with access to serial EEPROM to store setup and customer data
- Index signal processing adjustable in position and width
- Parameterization and absolute angle output via bidirectional high-speed synchronous-serial BiSS Interface (B mode)
- Resolution of up to 8192 angle steps per sine/cosine period
Tags
Categories:
Manufacturer:
iC-Haus
Other Names:
IC NQTSSOP20, ICNQTSSOP20, iC NQ TSSOP20, iC-NQTSSOP20, iCNQ TSSOP20
Product Brief
Datasheet
Package Info
- 250 kHz input frequency
- A QUAD B incremental outputs with selectable minimum transition distance (e.g. 0.25 s for 1 MHz at A)
- Binary and decimal resolution settings, e.g. 500, 512, 1000, 1024; programmable angle hysteresis
- Conversion time of just 250 ns including amplifier settling
- Count-safe vector follower principle, realtime system with 70 MHz sampling rate
- Direct sensor connection; selectable input gain
- ESD protection and TTL-/CMOS-compatible outputs
- Fast 24-bit on-chip multiturn counter
- Fault monitoring: frequency, amplitude, configuration (CRC)
- Front-end signal conditioning features offset (8 bit), amplitude ratio (5 bit) and phase (6 bit) calibration
- Fully re-programmable by BiSS interface with access to serial EEPROM to store setup and customer data
- Index signal processing adjustable in position and width
- Parameterization and absolute angle output via bidirectional high-speed synchronous-serial BiSS Interface (B mode)
- Resolution of up to 8192 angle steps per sine/cosine period
Previously Viewed Products
