nRF24L01+ Ultra Low-Power Single Chip 2.4GHz Transceiver Only

Manufacturer:
MFG Part #:

NRF24L01P-T

Part #:
NRF24L01P
Availability:
In Stock
RoHS Status:
$1.85
Qty:
Minumum Qty: 1

Ask a Question
Call Me
Email This Page
 
 

Product Information

The nRF24L0+1 is a unique wireless solution for compact, battery operated applications with stringent requirements on battery lifetime and cost. The transceiver operates in the license free worldwide 2.4GHz ISM band. It is specifically designed for two types of application: PC peripherals and ultra low power applications such as sports and wellness sensors. For PC peripherals such as wireless mice, keyboards and media center remotes it enables high performance and long battery life at a low solution cost. For sensor applications the ultra low power consumption and advanced power management enables battery lifetimes up to several years on a coin cell battery.

The nRF24L01+ offers a smooth transition from the nRF24L01
I
mproved co-existence performance and longer range
The nRF24L01+ is mechanically, functional and electrical drop in compatible with the nRF24L01. In addition it offers significant improvements on co-existence performance with wide band inference sources like WiFi compared to nRF24L01. It also adds a 250 kbps air-data rate mode offering -94dBm sensitivity for longer range operation.

Compact 4x4mm package, low cost external BOM
The nRF24L01+ integrates a complete 2.4GHz RF transceiver, an RF
synthesizer, and full baseband logic including the unique Enhanced Shock-
Burst™ hardware link layer, advanced power management and a high-speed
SPI for the host controller interface. No external loop filters, resonators or
VCO varactor diodes are required, only a low cost ±60ppm 16MHz crystal,
matching circuitry and the antenna.


Click to enlarge

Applications
• Wireless PC peripherals
• Mice, keyboards and remotes
• 3-in-one desktop bundles
• Advanced Media center remote controls
• VoIP headsets
• Game controllers
• Sports watches and sensors
• RF remote controls for consumer electronics
• Home and commercial automation
• Ultra low power sensor networks
• Active RFID
• Asset tracing systems
• Toys
 

Features

Drop in compatible with the
Worldwide 2.4GHz ISM band
Up to 2 Mbps on-air data rate
Ultra low power operation and advanced power management
11.3mA peak TX current at 0dB output power
13.5mA peak RX current at 2 Mbps air data rate
900nA in power down mode
On chip voltage regulator, 1.9 to 3.6V supply range
Enhanced ShockBurstTM hardware link layer
Automatic packet assembly (Preamble, Address and CRC)
Dynamic payload length
Selective auto acknowledgment with payload
Auto retransmit
6 data pipe MultiCeiver(TM)
Fully air compatible with Nordic nRF2401A, 02, E1 and E2 at 1 Mbps and 250 kbps air data rates
Low cost external 60ppm 16MHz crystal
5V tolerant inputs
Compact 20-pin 4x4mm QFN package
 

Specifications

Adaptive Frequency Hopping
Y, External Protocol/MCU dependent
Antenna - External
N
Antenna - Internal
N
Auto Acknowledge
Y, Programmable
Digital Interface Options
SPI
Error Handling
CRC
FCC Certified
N
Frequency
2400-2500 Mhz
Modulation Method
GFSK
On Air Data Rate
250 kbps, 1Mbps, 2Mbps
Operating Temp
-40 to 85 C
Pin Count
20
Protocol
Proprietary
RF Output Power
0 dBm
RX Sensitivity
-82 dBm at 2Mbps, -85dBm at 1Mbps, -94dBm at 250kbps
VDD Max
3.6 V
VDD Min
1.9 V
 

Documents

Product Brief
Datasheet

Previously Viewed Products