|
MN5010HS Ultra-Small GPS Receiver Module |
|
The Micro Modular Technologies MN5010HS Global Positioning System (GPS) Receiver is a complete, 20-channel receiver with high sensitivity that measures only 10mm by 10mm by 1.8mm. It features fast-acquisition hardware, integrated RF filtering, TCXO, reset circuits, real-time clock with on-board crystal, and an integrated LNA that allows operation with either active or passive a... More details...
| Quantity |
Price
|
|
|
1 To 99 Units
|
$37.77
|
|
100 To 499 Units
|
$29.00
|
|
|
|
|
|
Price $575.00
Dev / Eval Kit
Relevancy: 
Price $4.60
Recommended for same design
Relevancy: 
|
( ) indicates a required accessory.
|
|
| |
Downloads
 Datasheet
Hardware Guide
Software Guide
|
|
|
|
The Micro Modular Technologies MN5010HS Global Positioning System (GPS) Receiver is a complete, 20-channel receiver with high sensitivity that measures only 10mm by 10mm by 1.8mm. It features fast-acquisition hardware, integrated RF filtering, TCXO, reset circuits, real-time clock with on-board crystal, and an integrated LNA that allows operation with either active or passive antennas.
The user needs only provide DC power and a GPS signal; the MN5010HS will output the navigation solution in the widely-used NMEA-0183 protocol or in binary output protocol.
The 20-channel receiver allows all satellites in view to be tracked, providing an over-determined solution to minimize position jumps caused by individual satellite blockage. The fast-acquisition hardware design greatly reduces the time for signal acquisition when the receiver is initially powered up. The MN5010HS operates from a single battery supply between 3.25 and 5.5 VDC. For even further power reductions, the OEM design may use a commanded power-saving mode.
The MN5010HS is supported by an evaluation kit, including software, along with reference designs to speed OEM development. The MN5010HS is machine placeable by standard surface mount equipment and is available in tube or tape and reel. A metal shield is provided for RF protection and for automated nozzle pickup.
|
|
|
|
| |
|
|
Features - Complete, 20-channel GPS receiver based on SiRFstarIII GPS technology
- Highly integrated design includes on-board LNA, TCXO, RF filtering, Reset circuit, Real Time Clock circuit and crystal
- Ultra-small 10mm by 10mm by 1.8mm package
- Less than 100 mW total power consumption
- Fast-acquisition design for rapid position determination under all startup and operating conditions
- Extended commercial temperature operation (-20°C to +85°C)
- Supports active or passive antennas
- Standard NMEA-0183 or binary serial output
- Pb free RoHS compliant
- Supports SBAS (WAAS, EGNOS, MSAS)
- Hardware development kit available
Other Names |
Features - Complete, 20-channel GPS receiver based on SiRFstarIII GPS technology
- Highly integrated design includes on-board LNA, TCXO, RF filtering, Reset circuit, Real Time Clock circuit and crystal
- Ultra-small 10mm by 10mm by 1.8mm package
- Less than 100 mW total power consumption
- Fast-acquisition design for rapid position determination under all startup and operating conditions
- Extended commercial temperature operation (-20°C to +85°C)
- Supports active or passive antennas
- Standard NMEA-0183 or binary serial output
- Pb free RoHS compliant
- Supports SBAS (WAAS, EGNOS, MSAS)
- Hardware development kit available
Currently there are no specifications for this item
|
|
|
|
|
|
|
|
|
|
|
|
