|
“WiFly GSX” 802.11G Module |
|
The WiFly GSX module is a stand alone, embedded wireless 802.11 networking module. Because of its small form factor and extremely low power consumption, the RN-131G is perfect for mobile wireless applications such as asset monitoring, GPS tracking and battery sensors. More details...
| Quantity |
Price
|
|
|
1 To 4 Units
|
$59.00
|
|
5 To 9 Units
|
$56.00
|
|
10 To 24 Units
|
$53.69
|
|
25 To 49 Units
|
$51.77
|
|
|
|
|
|
Price $149.00
Dev / Eval Kit
Relevancy: 
|
( ) indicates a required accessory.
|
|
| |
Downloads
 Datasheet
User Manual
|
|
|
|
|
The WiFly GSX module is a stand alone, embedded wireless 802.11 networking module. Because of its small form factor and extremely low power consumption, the RN-131G is perfect for mobile wireless applications such as asset monitoring, GPS tracking and battery sensors. The WiFly GSX module incorporates a 2.4GHz radio, processor, TCP/IP stack, real-time clock, crypto accelerator, power management and analog sensor interfaces. This complete solution is preloaded with software to simplify integration and minimizes development of your application. In the simplest configuration the hardware only requires four connections (PWR, TX, RX, GND) to create a wireless data connection. Additionally, the sensor interface provides temperature, audio, motion, acceleration and other analog data without requiring additional hardware. he WiFly GSX module is programmed and controlled with a simple ASCII command language. Once the WiFly GSX is setup it can scan to find an access point, associate, authenticate and connect over any WifI network.
|
|
|
|
| |
|
|
Features - Ultra Low power usage (10uWatt sleep, 100mWatt active))
- Surface mount module
- Enterprise and Adohc networks
- TCP sockets with incoming and outbound connect modes
- UDP connectionless and broadcast modes
- Up to 8 sensor inputs for sleep wake and data ACQ
- Simple local configuration via ASCII commands
- FTP client for wireless firmware upgrades
- Can be powered from regulated 3.3-3.7V source or 2.0-3.0V batteries
- Programmable timers and wake/trigger modes
- On board ceramic chip antenna and U.FL connector for external antenna
- FCC /CE and WiFi certified, RoHS compliant
|
Features - Ultra Low power usage (10uWatt sleep, 100mWatt active))
- Surface mount module
- Enterprise and Adohc networks
- TCP sockets with incoming and outbound connect modes
- UDP connectionless and broadcast modes
- Up to 8 sensor inputs for sleep wake and data ACQ
- Simple local configuration via ASCII commands
- FTP client for wireless firmware upgrades
- Can be powered from regulated 3.3-3.7V source or 2.0-3.0V batteries
- Programmable timers and wake/trigger modes
- On board ceramic chip antenna and U.FL connector for external antenna
- FCC /CE and WiFi certified, RoHS compliant
Currently there are no specifications for this item
Product Information Downloads DatasheetUser Manual
|
|
|
|
|
|
|
|
|
|
|
|
