PoE Eval Board for Ag5200 PoE module

Manufacturer:
MFG Part #:

EVALAG5200

Part #:
EVALAG5200
Availability:
In Stock
RoHS Status:
$125.00
Qty:
Minumum Qty: 1

Ask a Question
Call Me
Email This Page
 
 

Product Information

The Silvertel EVALAG5200 PoE evaluation board will work with Power Sourcing Equipment (PSE) that supplies the power over the spare pair or the data pair with an auxiliary input as backup. It is suitable for use with the following product Ag5200 30W PD module.  The Ag5200 module is included.

Silvertels’ Ag5200 is a very cost effective PoE+ module for delivery of up to 30 Watts of output power. This is ideal for IP Telephone, Wireless Access Point, PTZ camera, door entry system and remote computer terminals applications. 

Ag5200 is compatible with both the IEEE 802.3af and 802.3at standards for signature recognition and class programming. The module works with both types of Power Sourcing Equipment (PSE) units - mid-span and end-span injectors.

Below shows an example set-up using an Ag5200 powered by a Phihong POE36U-1AT-R Midspan and supplying +12V to a Vivotek PZ6122 (or PZ6112) ethernet camera.

The PC ethernet port is connected to the data input of the Phihong POE36U-1AT-R (PSE) via a short Cat5e patch cable. The Data & Power output from the Phihong POE36U-1AT-R is connected to the input of the EVALAG5200 evaluation board (J1) via a CAT5e crossover cable (up to 100m). The data output of the EVALAG5200 evaluation board is connected to the data port of the ethernet camera via a short CAT5e patch cable. The +12V (parallel configuration) power output from the EVALAG5200 evaluation board (J4) connects to the dc input of the Vivotek PZ6122 ethernet camera.

 

Documents

Silvertel EVALAG5200 User Manual
Silvertel Datasheet

Previously Viewed Products