64MHz ARM Cortex-M4F, 2.4GHz multi-protocol SoC (Rev 1)

Manufacturer:
MFG Part #:

NRF52832-QFAA-R

Part #:
NRF52832-QFAA-R-CXO
Availability:
In Stock
RoHS Status:
 
This item is currently not available for purchase online.

Please call us at 877-466-9722 to request a quote.

Ask a Question
Call Me
Email This Page
 
 

Product Information

nRF52832The nRF52832 SoC is a powerful, highly flexible ultra-low power multiprotocol SoC ideally suited for Bluetooth® Smart ANT and 2.4GHz ultra low-power wireless applications. The nRF52832 SoC is built around a 32-bit ARM® Cortex™-M4F CPU with 512kB + 64kB RAM. The embedded 2.4GHz transceiver supports Bluetooth Smart, ANT and proprietary 2.4 GHz protocol stack. It is on air compatible with the nRF51 Series, nRF24L and nRF24AP Series products from Nordic Semiconductor. nRF52832

Processing power
 
The nRF52832 incorporates a powerful Cortex-M4F processor enabling the most demanding applications with complex arithmetic requirements to be realized in a single chip solution. The IC supports DSP instructions, a Floating Point Unit (FPU), single-cycle multiply and accumulate, and hardware divide for energy-efficient process of computationally complex operations.

Multiprotocol radio 
The 2.4GHz radio supports multiple protocols including Bluetooth Smart, ANT and 2.4GHz proprietary. The radio has high definition RSSI and highly automated functionality, including EasyDMA for direct memory access during packet send and retrieve. Nordic provides protocol stacks for Bluetooth Smart, ANT and Gazel (2.4GHz) as software downloads.

Power Efficiency 
The nRF52832 SoC is an extremely power efficient device that can run from a supply between 1.7V and 3.6V. All individual peripherals and clocks offer complete flexibility of power down when not required for task operation thus minimizing power consumption to a minimum. The IC has a comprehensive system of automated and adaptive power management features. These features range across the entire IC’s operation from power supply switching to peripheral bus/EasyDMA memory management, to automated shut down of all but the absolute essential peripherals required to perform a task.

On-chip NFC tag 
NFC™-A tag support is included on chip. Out-of-Band (OOB) pairing using NFC simplifies the process of authenticated pairing between two Bluetooth devices by exchanging authentication information over an NFC link.

Package options 
The nRF52832 is available as a 6x6mm QFN48 package


APPLICATIONS 
  • Internet of Things (IoT)
  • Wearables
  • SmartHome sensors
  • Connected white goods
  • Computer peripherals
  • Voice-command smart remotes
  • A4WP ‘Rezence’ wireless charging
  • Beacons
  • Sports and fitness sensors and hubs
  • Connected health products
  • Smart watches
  • RC Toys
  • Interactive games
  • Building automation and sensor networks
 

Features

Single chip, highly flexible, 2.4 GHz multi-protocol SoC
32-bit ARM Cortex-M4F Processor
1.7v to 3.6v operation
512kB flash + 64kB RAM
Supports concurrent Bluetooth Smart/ANT protocol operation
On-chip NFC tag for Out-of-Band (OOB) pairing
Up to +4dBm output power
-96dBm sensitivity, Bluetooth Smart
Thread safe and run-time protected
Event driven API
On air compatible with nRF24L and nRF24AP series
2 data rates (2Mbps/1Mbps)
PPI - maximum flexibility for power-efficient applications and code simplification
Automated power management system with automatic power management of each peripheral
Configurable I/O mapping for analog and digital I/O
3 x Master/Slave SPI
2 x Two-wire interface (IC)
UART (RTS/CTS)
3 x PWM
AES HW encryption
Real Time Counter (RTC)
Digital microphone interface (PDM)
On-chip balun
 

Documents

product brief

Previously Viewed Products