|
MN1010 Low-power GPS Receiver Module |
|
The Micro Modular Technologies MN1010 Global Positioning System (GPS) Receiver is a
complete, 12-channel receiver intended for OEM applications that measures only 10mm by 10mm by
2mm. It features fast-acquisition hardware, integrated RF filtering, flash memory and a TCXO. The
user needs only provide DC power and a GPS signal; the MN1010 will output the navigation solution
i... More details...
|
|
|
Price $575.00
Dev / Eval Kit
Relevancy: 
Price $4.60
Required for part to work
Relevancy: 
|
( ) indicates a required accessory.
|
|
| |
Downloads
 Datasheet
Hardware Guide
Software Guide
|
|
|
|
The Micro Modular Technologies MN1010 Global Positioning System (GPS) Receiver is a complete, 12-channel receiver intended for OEM applications that measures only 10mm by 10mm by 2mm. It features fast-acquisition hardware, integrated RF filtering, flash memory and a TCXO. The user needs only provide DC power and a GPS signal; the MN1010 will output the navigation solution in the widely-used NMEA-0183 format.
The 12-channel receiver allows all satellites in view to be tracked, providing an over-determined solution to minimize position jumps caused by individual satellite blockage. The fast-acquisition hardware design greatly reduces the time for signal acquisition when the receiver is initially powered up. The MN1010 requires a 1.8-volt supply and a separate 3-volt supply for the internal TCXO. For even further power reductions, the OEM design may switch power or use a commanded powersaving mode.
The MN1010 is supported by an evaluation kit, including software, along with reference designs to speed OEM development. The MN1010 is machine placeable by standard surface mount equipment and is available in tape and reel. A metal shield is provided for RF protection and for automated nozzle pickup.
|
|
|
|
| |
|
|
Features - Complete 12-channel GPS receiver including RF filtering, flash memory and TCXO
- Less than 75 mW total power consumption for extended battery life
- Ultra-small 10mm by 10mm by 2mm 36-pin LGA package for automatic placement in a high volume production environment
- Fast-acquisition design for rapid position determination under all startup and operating conditions
- Industrial temperature operation (-40°C to +85°C)
- Supports active antennas
- Standard NMEA-0183 serial messaging
- Pb free RoHS compliant
- Supported by hardware and software development kits
Specifications - A-GPS Support: N
- Channels: 12
- Current Draw: 35 mA
- Embedded Antenna: N
- Frequency: 1575.42 Mhz
- Protocols: NMEA
- SBAS Support: N
- SiRF Chip: N
- Timing Specific: N
- Track Sensitivity: -152 dBm
- TTFF, Cold: 42 Sec.
- TTFF, Hot: 8 Sec.
Other Names |
Features - Complete 12-channel GPS receiver including RF filtering, flash memory and TCXO
- Less than 75 mW total power consumption for extended battery life
- Ultra-small 10mm by 10mm by 2mm 36-pin LGA package for automatic placement in a high volume production environment
- Fast-acquisition design for rapid position determination under all startup and operating conditions
- Industrial temperature operation (-40°C to +85°C)
- Supports active antennas
- Standard NMEA-0183 serial messaging
- Pb free RoHS compliant
- Supported by hardware and software development kits
Specifications - A-GPS Support: N
- Channels: 12
- Current Draw: 35 mA
- Embedded Antenna: N
- Frequency: 1575.42 Mhz
- Protocols: NMEA
- SBAS Support: N
- SiRF Chip: N
- Timing Specific: N
- Track Sensitivity: -152 dBm
- TTFF, Cold: 42 Sec.
- TTFF, Hot: 8 Sec.
|
|
|
|
|
|
|
|
|
|
|
|
