PLX Technology > PLX I/O Accelerators >

PLX PCI I/O Accelerators are ideal for:

• Intelligent Peripheral Devices
• Embedded Hosts

PCI 9000 Series Certificate of RoHS Compliance
PCI9030/PCI9054 Product Change Notification

I/O Accelerators

PLX Technology offers two types of I/O Accelerators: Targets and Masters. PCI Target I/O Accelerators support Direct Slave Operations; PCI bus Master devices to access memory and other slave devices on a local bus. These 32-bit, 33MHz products include the PCI 9052 and PCI 9030. PCI Bus Master I/O Accelerators support Direct Slave operation, plus they add support for Direct Slave Operations allowing processor/local bus master devices to access memory and other devices on the PCI bus, and they support DMA, allowing masters on either bus to direct the chip to perform data transfers. The PCI Bus Master I/O Accelerators from PLX are available in 64-bit, 66MHz, 32-bit, 66MHz and 32-bit, 33MHz formats.

9000 Series Development Kits from PLX Technology

PLX Technology offers a great selection of Rapid Development Kits to help you get started integrating PLX I/O Accelerators into your applications right away.

The fast & efficient way to add PLX Technology Master and Target/Slave products to your device.

• 32-bit 33MHz PCI r2.2 Slave (Target) I/O Accelerator for Embedded Applications
• Generic Local Busses support General-Purpose, Data-Intensive Applications
• Ideal for Universal Adapter Designs and Small Form Factors
• Supports, 8, 16 and 32-bit Local Bus Devices
• Supports 3.3V, 5V-Tolerant I/O Signaling
• 176-pin PQFP and 180-pin (12mm) µBGA Package options
• Development Tools Available

• For new designs, PLX recommends the faster PCI 9052 family
• Low Cost Connectivity for PCI Slave Designs
• Ideal for Converting ISA designs to PCI
• 32-bit, 33MHz PCI Bus

• 32-bit 33MHz PCI r2.2 Slave (Target) I/O Accelerator for Embedded Applications
• Generic Local Busses support General-Purpose, Data-Intensive Applications
• Ideal for Conversion of Legacy Bus Designs to PCI Bus Designs
• Supports 8, 16 and 32-bit Local Bus Devices
• 160-pin PCFP Package
• Development Tools Available

• 32-bit, 33MHz, PCI r2.2 Bus Mastering I/O Accelerator for Embedded Applications
• Motorola MPC860 Power QUICC support for Communications and Applications
• Generic Local Buses support General-Purpose, Data-Intensive Applications
• Supports 3.3V, 5V-Tolerant I/O Signaling
• 176-pin PQFP and 225-pin PBGA Packages
• Development Tools Available

• 32-bit 66MHz Bus Mastering I/O Accelerator for Embedded Applications
• 66MHz PowerQUICC and Generic Local Bus Interface Options
• Two DMA Channels
• Hot Swap Ready
• 256-pin (17mm) Fine Pitch PBGA Package
• Development Tools Available

• For new designs, PLX recommends the PCI 9080, which is a lower cost, fully-compatible replacement for the PCI 9060
• The first full-featured PCI Interface Chip on the Market

• Operates at both 3.3V and 5V
• PCI Version 2.1 Compliant
• Two DMA Channels
• 8 Programmable FIFOs
• Programmable Local Bus

• 64-bit PCI Bandwidth for 32-bit Local Bus Applications
• 66MHz PowerQUICC and Genric Local Bus Interface Options
• Two DMA Channels
• Hot Swap Ready
• 272-pin (27mm) PBGA Package
• Development Tools Available

PCI9080 Ordering
Information and Available Packages

PCI9656 Ordering
Information and Available Packages