Like the previous bestselling DWM1000 module, the DWM1001 module will be based on the same UWB DW1000 silicon from Decawave.

 

However, unlike the DWM1000, DWM1001 will have a BLE radio (Nordic nRF52), and the module will come pre-loaded with a “ready to go” RTLS firmware stack., AND ship pre-certified!

 

This immense leap forward for Decawave and UWB technology, enabling a much quicker design cycle for customers looking to implement “indoor GPS” capability with <10cm accuracy. 

 

 

Features

  • Decawave DW1000 UWB transceiver (IEEE802.15.4-2011 compliant )
  • UWB PCB antenna (6.5 GHz)
  • 6.8 Mbps data rate
  • ~60 m line-of-sight range
  • Nordic Semiconductor nRF52832 SoC - ARM Cortex M4, 512K Flash
  • Bluetooth chip antenna
  • 3-axis accelerometer
  • Low power - Sleep mode: <5A
  • Supply voltage: 2.8 V to 3.6 V
  • 19.1 mm x 26.2 mm x 2.6 mm
  • 34 x 1 mm pitch side castellations
  • Serial Wire Debug (SWD)
  • External Interfaces: SPI slave, I2C, UART, I2S Audio, NFC, GPIOs, Wakeup
  • RTLS firmware:
  • - Complete RTLS & network stack
  • - User options for partial or full re-flash
  • - Location Engine on Tag
  • - Over-the-air firmware updates
  • Application Code:
  • - Two-Way-Ranging (TWR) RTLS
  • - Application memory area for custom code
  • Configuration via Bluetooth or UART commands
  • MAC Layer:
  • - Resource allocation, frame & slot timing
  • 6LoWPAN wireless mesh network*:
  • - Network management & data routing
  • - Discovery, joining, leaving
  • Security*:
  • - AES encryption of data
  • - Authentication: key generation & exchange
  • API Access to Drivers:
  • - Decawave DW1000 & Nordic nRF52832
  • - Bluetooth & Motion Sensor

DWM1001 ScenSor Products


Loading ...

Previously Viewed Products