4Mb SPI NOR Flash 2.7V-3.6V USON8 (2*3mm)
Manufacturer:
MFG Part #:
GD25Q41BUIG
Part #:
GD25Q41BUIG
Availability:
Contact Symmetry For Lead Time
This item is currently not available for purchase online.
Please call us at 877-466-9722 to request a quote.
Please call us at 877-466-9722 to request a quote.
GigaDevice GD25Q41BUIG 4Mb SPI NOR Flash 2.7V-3.6V USON8 (2*3mm). With read speed up to 120MHz and Standard/Dual/Quad I/O operations, GigaDevice SPI NOR Flash supports higher data transfer speed of 240Mbit/s for Dual SPI and 480Mbit/s for Quad SPI.
GigaDevice products have the merits of low power consumption with as low as 1uA standby current, high reliability with 20 years data retention and 100,000 Program/Erase cycles, and with wide operating temperature range from 40°C~+85°C.
GigaDevice advanced security features are designed to meet the demand from a variety of consumers including DVD/CD drives, STB, DPF, Desktop and Notebook PCs, DVD Recorders, WLAN, DSL, LCD Monitors, Flat Panel TV, Printers, GPS, MP3 and more.
GigaDevice products have the merits of low power consumption with as low as 1uA standby current, high reliability with 20 years data retention and 100,000 Program/Erase cycles, and with wide operating temperature range from 40°C~+85°C.
GigaDevice advanced security features are designed to meet the demand from a variety of consumers including DVD/CD drives, STB, DPF, Desktop and Notebook PCs, DVD Recorders, WLAN, DSL, LCD Monitors, Flat Panel TV, Printers, GPS, MP3 and more.
Features
Back to top4M-bit Serial Flash
- 512K-byte
- 256 bytes per programmable page
Standard, Dual, Quad SPI
- Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD#
- Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD#
- Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3
High Speed Clock Frequency
- 104MHz for fast read with 30PF load
- Dual I/O Data transfer up to 208Mbits/s
- Quad I/O Data transfer up to 416Mbits/s
Software/Hardware Write Protection
- Write protect all/portion of memory via software
- Enable/Disable protection with WP# Pin
- Top or Bottom, Sector or Block selection
Program/Erase Speed
- Page Program time: 0.35ms typical
- Sector Erase time: 50ms typical
- Block Erase time: 0.1870.25s typical
- Chip Erase time: 1.5s typical
Flexible Architecture
- Sector of 4K-byte
- Block of 32/64K-byte
Low Power Consumption
- 20mA maximum active current
- 5uA maximum power down current
Single Power Supply Voltage
- Full voltage range: 2.7~3.6V
Minimum 100,000 Program/Erase Cycles
Advanced security Features
- Power Supply Lock-Down
- 3*512-Byte Security Registers With OTP Locks
- Volatile and Non-volatile Status Register Bits
Documents
Back to topPreviously Viewed Products
Part #: GD25Q41BUIG
4Mb SPI NOR Flash 2.7V-3.6V USON8 (2*3mm)
4Mb SPI NOR Flash 2.7V-3.6V USON8 (2*3mm)