Hirschmann Solutions Iridium Transceiver Antenna System

Oct 6, 2014
 

Symmetry Electronics has expanded its wireless offerings to now include satellite antennas and customized M2M solutions from Hirschmann Solutions, including the newly released magnetic and adhesive mount plug-and-play Iridium Transceiver Antenna System (ITAS), which utilizes Iridium’s 66 Low Earth Orbiting satellites to provide impeccable service around the globe.

 

Having all your communication needs plug-and-play ready is the leading idea behind the Iridium Transceiver Antenna System. The ITAS already has the Iridium 9602 SBD, the Iridium antenna, serial data interface, and the power regulation circuit on-board, covering the entire RF and modem integration. A M12/8 connector interfaces to the customer hardware. Mobile Originated (MOSBD) and Mobile Terminated (MT-SBD) messages can be sent via Iridium Short Burst Data (SBD). The elimination of RF cable loss leads to higher network performance since there is no RF cable routing outside of the ITAS unit.

 

ITAS Benefits

  • Reduction of complexity in customers system
  • Accelerated time-to-deployment
  • No RF cable routing outside of the ITAS unit
  • Higher performance - elimination of RF cable-loss
  • Significant cost reduction
  • Certified communication device
  • All-in-one solution—all out of one hand
  • Integrated Iridum 9602 SBD trasnceiver
  • Integrated power regulation circuit for 8-32V power supply
  • 5V version on-reqeust
  • Transient and reverse voltage protection
  • RS-232 interface (3-wire)
  • Screw mount or Magnetic mount
  • On/Off signal line optional
  • Tamper detect and network status line
  • Molded sealing gasket
  • Iridium certified
  • Competitive cost even at lower volumes
  • Extension cables available upon request

 

ITAS is simply the latest addition of M2M solutions including low-profile, roof, modular, film, “sandwich” and combined style antennas for GPS, GLONASS, GSM, Wi-Fi, z. B, 900-1900 MHz, Orbcomm, OTAS, and ITAS applications.

 

Hirschmann Benefits

  • Reduction of complexity in customers system
  • Accelerated time-to-deployment
  • No RF cable routing outside of the ITAS unit
  • Higher performance - elimination of RF cable-loss
  • Significant cost reduction
  • Certified communication device
  • Non-fused protection against electrical transients (ESD, load dump, etc. per SAE J1113/11/12/13)
  • Fused over-current protection allowing for use with unregulated power supplies of 8-32VDC
  • Automotive grade M12-8 pin connector assembly terminates and grounds the cable-shield
  • Perfectly suited for use in electrically noisy environments
  • Problem-free use in wide variety of applications
  • Extension cables with waterproof connectors available

  

Symmetry’s wireless engineering specialists offer technical assistance and antenna product selection guidance and Hirschmann products are available by phone at (310) 536-6190, or through our online contact system.



Written By: Stephanie Guimera

Subscribe

Sign up to get tech news, product updates and store promos from Symmetry Electronics.

Subscribe

Blog Archive

  2019
  2018
  2017
  2016
  2015
  2014
  2013
  2012
  2011
  2010
  2009

Previously Viewed Products