5-Channel Phased Array Sine Encoder

Manufacturer:
MFG Part #:

IC-PD3948OQFN32-5X5

Part #:
IC-PD3948OQFN32-5X5
Availability:
In Stock
RoHS Status:
Unit Price:$7.07
Qty:
Minumum Qty: 1
Ask a Question
Call Me
Email This Page
 
 

Product Information

Back to top
iC-PD3948 is an optical sensor IC with integrated photodiodes whose signal currents are converted into output voltages by low-noise transimpedance amplifiers.

Due to a high transimpedance gain of typically 4 M, output signal voltages of several hundred Millivolts are obtained at illumination levels of just 1 to 3 mW/cm2. In most cases complicated noise suppression measures are thus rendered unnecessary.

As the pin names would suggest, iC-PD3948 is typically applied as a sine encoder for motor feedback systems. To this end, iC-PD3948 provides sine and cosine signals with both a high resolution of 2048 PPR (plus an additional index signal) and a low resolution of 1 PPR (at C/D).

All code disc signal tracks are evaluated differentially; the high resolution sine signals are read by photodiodes in a phased array. The layout of the signal amplifiers is such that there is good paired channel matching, reducing the time and effort required for calibration to an absolute minimum.

The spectral sensitivity ranges from visible to near infrared light, with the maximum sensitivity close to a wavelength of 680 nm. An output voltage of 1 V is typical in low light conditions, for instance when iCPD is illuminated at only 2 mW/cm2 by a 740 nm LED. A relatively low LED current is enough to operate the sensor, proving beneficial to the life expectancy of the LED at high operating temperatures.

Applications:

• Incremental sine encoders with commutation information
• Motor feedback encoder
• AC and BLDC motor systems


Symmetry Electronics (and its e-commerce division: SemiconductorStore.com) is an authorized iC-Haus distributor.
 

Features

Back to top
Compact encoder sensor with differential scanning and sine outputs
Phased-array design for excellent signal matching
Reduced cross talk due to moderate track pitch
Ultra low dark currents for operation to high temperature
Low noise amplifiers with high transimpedance of typ. 4 MO
Short-circuit-proof, low impedance voltage outputs for enhanced EMI tolerance
Space saving QFN and optoBGA packages (RoHS compliant)
Low power consumption from single 4.5 to 5.5 V supply
Operational temperature range of -40 to +110 C
Suitable code disc: PD2S 39-2048 (glass 1 mm) OD ? 39 mm, ID ? 18.0 mm, optical radius 17.5 mm
 

Previously Viewed Products

5-Channel Phased Array Sine Encoder
Part #: IC-PD3948OQFN32-5X5
5-Channel Phased Array Sine Encoder