12-Bit Angular Hall Encoder IC

MFG Part #:


Part #:
Contact Symmetry For Lead Time
RoHS Status:
Unit Price:$34.80
Minumum Qty: 1
Ask a Question
Call Me
Email This Page

Product Information

Back to top
The iC-MH 12-bit angular encoder is a position sensor with integrated Hall sensors for scanning a permanent magnet. The signal conditioning unit generates constant-amplitude sine and cosine voltages that can be used for angle calculation. The resolution can be programmed up to a maximum of 4,096 angular increments per rotation.
The integrated serial interface also enables the position data to be read out to several networked sensors.  And the integrated memory can be written embedded in the data protocol.


Back to top
Real-time system using tracking principle for up to 120.000 rpm
Integrated hall sensors with automatic offset compensation
4-fold sensor arrangement for displacement tolerant assembly
Gain control for constant output amplitude
Interpolator with 4096 angular steps per turn (0.1 resolution)
Programmable resolution, hysteresis, edge control, zero position and rotational direction
Incremental outputs with edge frequency up to 8 MHz
RS422 outputs with AB quadrature signals with index
Commutation signals U, V, W for brushless dc motors
Serial interface for absolute output and programming
SSI compatible output mode
Integrated zapping diodes for device setup and OEM data, programmable via serial interface
Error output for faulty signals (loss of magnet, frequency error); error codes accessible via serial interface
Extended temperature range -40 to +125 C

Previously Viewed Products

12-Bit Angular Hall Encoder IC
12-Bit Angular Hall Encoder IC