Power-Saving PWM Relay/Solenoid Driver

MFG Part #:

IC-GE100 DFN8-3x3

Part #:
Short Lead Time
RoHS Status:
Unit Price:$2.23
Minumum Qty: 1
Ask a Question
Call Me
Email This Page

Product Information

Back to top
iC-GE100 is a PWM driver for inductive loads, such as relay coils, solenoid valves and other inductive loads.
The setpoints for the coil’s energising and hold current are pre-set by means of external resistors RACT and RHOLD. These currents can be set in a range from 10 to 100 mA. The iC-GE100 switches from energising to hold mode after 50 ms provided that the set energising current has been reached.
The changeover between energising and hold modes is suitable for typical relay drives which require a powerful initial energising current which can then be reduced after closing the air gap in a magnetic circuit. The quadratic dependence on the current intensity means that cutting the current by half reduces the power dissipation by ca. 75%.
Using PWM the output current is controlled to the values set at RACT and RHOLD. The internal flyback diode maintains the current during the switching pauses. The switching frequency of ca. 80 kHz is provided by the internal oscillator.
The device is shutdown by a Low signal at input EN or the removal of the power supply; the current reduction in the coil is supported by the changeover of the free-wheeling circuit. The Zener diode now active permits higher free-wheeling voltages and thus a quicker demagnetising of the coil.


Back to top
Current control for inductive actuators at 24 V (10 to 36 V)
Power saving and power dissipation reduced switching
Individual setting of energising and hold current
Contact conserving switching of relays synchronous to the mains
High efficient current control up to 100mA
Monitoring of coil current, supply voltage and temperature
Shutdown with overtemperature and undervoltage
Status indication via LED or logic output
Fast demagnetising with 15 V countervoltage

Previously Viewed Products

Power-Saving PWM Relay/Solenoid Driver
Part #: IC-GE100 DFN8-3x3
Power-Saving PWM Relay/Solenoid Driver