6-Axis Flagship Motion Sensor

Manufacturer:
MFG Part #:

ICM-42605

Part #:
ICM-42605
Availability:
In Stock
RoHS Status:
Unit Price:$4.25
Qty:
Minumum Qty: 1
Ask a Question
Call Me
Email This Page
 
 

Product Information

Back to top
The ICM-42605 is a 6-axis Motion Tracking device that combines a 3-axis gyroscope, 3-axis accelerometer, in a small 2.5 x 3 x 0.91mm (14-pin LGA) package.

• High performance specs
- Gyroscope sensitivity error: ±0.5%
- Gyroscope noise: 3.8mdps/√Hz
- Accelerometer noise: 70µg/√Hz
• Includes 2K-byte FIFO to reduce traffic on the serial bus interface, and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low-power mode
• EIS FSYNC support

ICM-42605 includes on-chip 16-bit ADCs, programmable digital filters, an embedded temperature sensor, and programmable interrupts. The device features an operating voltage range of 1.71V – 3.6V. Host interface supports I3CSM protocol at speeds up to 12.5MHz (data rates up to 12.5Mbps in SDR mode, 25Mbps in DDR mode), I²C protocol at speeds up to 1MHz, and SPI protocol at speeds up to 24MHz.

A comprehensive development platform for ICM-42605 is available to help customers evaluate and develop applications.

Applications:
• Smartphones and Tablets
• Wearable Sensors
• Virtual Reality headsets and controllers
• IoT Applications

Symmetry Electronics is an authorized InvenSense distributor.
 

Features

Back to top
Gyroscope programmable full-scale range of 15.625, 31.25, 62.5, 125, 250, 500, 1000, and 2000 degrees/sec
Accelerometer programmable full-scale range of 2g, 4g, 8g and 16g
Low-Noise mode 6-axis current consumption of 0.65mA
o Gyroscope Noise: 3.8mdps/?Hz
o Accelerometer Noise: 70g/?Hz
2K-byte FIFO reduces traffic on serial bus interface
EIS FSYNC support
User-programmable digital filters for gyroscope, accelerometer, and temperature sensor
User-programmable interrupts
APEX Motion Functions: Pedometer, Tilt Detection, Raise to Wake/Sleep, Tap Detection, Wake on Motion, Significant Motion Detection
Host interface: 12.5MHz I3CSM, 1MHz IC, 24MHz SPI
Digital-output temperature sensor
Nominal VDD operation at 1.8V
20,000 g shock tolerant
RoHS and Green compliant
 

Documents

Back to top
InvenSense Datasheet
InvenSense Product Brief

Previously Viewed Products

6-Axis Flagship Motion Sensor