HAL830UT-A Linear Hall Effect Sensor Analog TO92UT

Manufacturer:
MFG Part #:

HAL830UT-A-2-B-1-00

Part #:
HAL830UT-A
Family:
Availability:
In Stock
Unit Price:$2.50
Qty:
Minumum Qty: 1
Ask a Question
Call Me
Email This Page
 
 

Product Information

Back to top
The HAL 83x family consists of robust multi-purpose Hall sensors for linear displacement and angle detection below 90°. They offer flexibility thanks to the analog and PWM output as well, as to the programmable low-pass filter. Due to the high temperature stability, the sensors can be applied in harsh environments and their ability to detect low magnetic fields leads to reduced system costs.
    
All new family members will leverage upon Micronas’s long success in linear Hall-effect sensors, full in-house manufacturing, and automotive-proven zero ppm track record.  Major characteristics such as magnetic field range, sensitivity, output quiescent voltage, and output voltage range are programmable in a non-volatile memory. All sensors feature a temperature-compensated Hall plate with choppered offset compensation, an A/D converter, digital signal processing, a D/A converter with output driver, an EEPROM with redundancy and lock function for the calibration data, a serial interface for programming the EEPROM, and protection devices at all pins.
   
The sensor can easily be calibrated for perfectly adjusting its output to the input signals and to compensate for any variations in the application (magnet positioning, temperature drift). This enables operation over the full temperature range with high accuracy.
  
     
Applicattions:
  • Distance and linear movement measurements
  • Angle sensors like throttle position, pedal position, and EGR applications
  • Contactless potentiometers
   
 

Features

Back to top
High-precision linear Hall-effect sensor with 12-bit analog output
Offset drift over temperature less than 0.2% of VSUP (0.1% for HAL 835)
Programmable temperature compensation for sensitivity
Open-circuit (ground and supply line break) detection with 5 kO pull-up and pull-down resistor, overvoltage and undervoltage detection
Programmable clamping function
Programming and operation of multiple sensors at the same supply line
High immunity against ESD
Operates from -40 C up to 170 C junction temperature
Overvoltage and reverse-voltage protection at all pins, short-circuit protected push-pull output
Magnetic field measurement range from 15 mT up to 150 mT (HAL 835)
Flexible analog or PWM output (HAL 835)
Programmable low-pass filter at 80 Hz (less noise) or 2 kHz (faster response) (HAL 835)
Backbias cancellation feature enables the measurement of small AC magnetic fields when superposed with large DC fields (HAL 835)
 

Documents

Back to top

Previously Viewed Products