72MHz 64K Flash 8K SRAM up to 24 I/O

MFG Part #:


Part #:
Lead Time 20 weeks
RoHS Status:
This item is currently not available for purchase online.

Please call us at 877-466-9722 to request a quote.
Ask a Question
Call Me
Email This Page

Product Information

Back to top
GD32® is a new 32-bit high performance, low power consumption universal microcontroller family powered by the ARM® Cortex®-M3 RISC core, which targeted at various MCU application areas. GD32® family integrates features to simplify system design and provide customers wide range of comprehensive and superior cost effective MCU portfolios with proven technology and great innovation. Building on GigaDevice advanced patented "gFlash" memory technology and mass production experiences, it provides new form of MCUs which offers customer high functionality and quality. GD32® family includes entry line, performance line and connectivity line currently.

GD32® MCU incorporates the 32-bit ARM® Cortex®-M3 processor core operating at 108 MHz max frequency with Flash accesses zero wait states to obtain maximum efficiency. It provides up to 3024 KB on-chip Flash memory and up to 96 KB SRAM memory. An extensive range of enhanced I/Os and peripherals connected to two APB buses.  The device offers up to three 12-bit 1MSPS ADCs, up to ten general-purpose 16-bit timers plus one PWM advanced timer, as well as standard and advanced communication interfaces: up to three SPIs, two I2Cs, five USARTs, an USB 2.0 OTG FS and two CANs. The device operates from a 2.6 to 3.6 V power supply and available in -40 to +85°C temperature range. Three power saving modes provides the flexibility for maximum optimization between wakeup latency and power consumption, an especially important consideration in low power applications.

GD32® series MCUs also bring much advantage to the end-user. The max speed of GD32® MCU has increased 50% than the market competing products. Code execution efficiency of the same frequency has enhanced 30%-40%. Current consumption of the same frequency has reduced 20%-30%. These performances provide maximum capability and bandwidth options for various market requirements.

The above features make the GD32® MCUs suitable for a wide range of applications. It is ideal for use in industrial control, user interface, motor drives, power monitor and alarm systems, consumer and handheld equipment, solar photovoltaic control, touch panel, PC peripherals and so on.

Symmetry Electronics is an authorized GigaDevice distributor.


Back to top
ARM Cortex-M3 core
Frequency up to 72 MHz
Flash access zero wait state
Single-cycle multiplier and hardware divider
NVIC support 16 internal and 60 external interrupts, each interrupt has 16 priority levels
Flash size from 16KB to 64 KB
SRAM size from 4KB to 8 KB with HW parity checking
3KB ISP loader ROM
Low power management
Power saving mode: sleep, deep-sleep and standby mode
Independent battery supply for real-calendar RTC and backup register
Advanced analog peripherals
1 x 12bit, 1s ADC (16 channels)
1 x 12-bit DAC
2 x fast rail-to-rail low-power comparators
Integrated peripherals interface
Up to 2 x USART/UART/lrda/LIN/ISO7816
Up to 2 x SPI (18Mbits), 1 x I2S multiplexed
Up to 2 x I2C (400Kbit/s)
USB 2.0 FS (12Mbit/s)
Touch sensing interface (TSI, supports up to 18 external electrodes)
On-chip resources
1 x 16 bit Advanced Timer, 1 x SysTick Timer, 5 x 16 bit GPTM, 1 x 32 bit GPTM, 1 x Basic Timer, 2 x WDG
5-channel DMA support: Timers, ADC, SPIs, I2Cs, USARTs, DAC and I2Ss
System supervisor and reset: POR, PDR and LVD
80% GPIO available
32-bit CRC & 96-bit unique ID
On-chip Clock: HSI (8MHz) and LSI (40KHz)
TSSOP20 (6.5 x 4.4 x 1mm)
QFN32 (5 x 5 x 0.75mm)
LQFP48 (7 x 7 x 1mm)
LQFP64 (10 x 10 x 1.4mm)


Back to top
GigaDevice Product Selection Guide

Previously Viewed Products