1.8v 1Gb SPI NAND WSON8*6mm pa

Part #:


In Stock
Unit Price:$1.57
Minumum Qty: 1
Ask a Question
Call Me
Email This Page

Product Information

Back to top
SPI (Serial Peripheral Interface) NAND Flash provides an ultra cost-effective while high density non-volatile memory storage solution for embedded systems, based on an industry-standard NAND Flash memory core. It is an attractive alternative to SPI-NOR and standard parallel NAND Flash, with advanced features:

• Total pin count is 8, including VCC and GND
• Density is 1Gbit
• Superior write performance and cost per bit over SPI-NOR
• Significant low cost than parallel NAND

This low-pin-count NAND Flash memory follows the industry-standard serial peripheral interface, and always remains the same pin out from one density to another. The command sets resemble common SPI-NOR command sets, modified to handle NAND specific functions and added new features. GigaDevice SPI NAND is an easy-to-integrate NAND Flash memory, with specified designed features to ease host management:

• User-selectable internal ECC. ECC code is generated internally during a page program operation. When a page is read to the cache register, the ECC code is detect and correct the errors when necessary. The 64-bytes spare area is available even when internal ECC enabled. The device outputs corrected data and returns an ECC error status.

• Internal data move or copy back with internal ECC. The device can be easily refreshed and manage garbage collection task, without need of shift in and out of data.

• Power on Read with internal ECC. The device will automatically read first page of fist block to cache after power on, then host can directly read data from cache for easy boot. Also the data is promised correctly by internal ECC.

It is programmed and read in page-based operations, and erased in block-based operations. Data is transferred to or from the NAND Flash memory array, page by page, to a data register and a cache register. The cache register is closest to I/O control circuits and acts as a data buffer for the I/O data; the data register is closest to the memory array and acts as a data buffer for the NAND Flash memory array operation. The cache register functions as the buffer memory to enable page and random data READ/WRITE and copy back operations. These devices also use a SPI status register that reports the status of device operation.

Symmetry Electronics is an authorized GigaDevice distributor.


Back to top
Power Supply Voltage: 1.7V~2.0V
High Speed Clock Frequency- 120MHz for fast read with 30PF load- Quad I/O Data transfer up to 480Mbits/s
Flexible Memory Architecture1Gbit & 2Gbit:- 2048-Byte page for read and program, spare area 128-Byte- (128K + 8K)-Byte per block for erase
Enhanced Access Performance- 2K-Byte cache for fast random read for 1G & 2G- Cache read and cache program
Advanced Feature for NAND- Internal ECC option- Internal data move by page with ECC- Promised good block0 with ECC

Previously Viewed Products

1.8v 1Gb SPI NAND WSON8*6mm pa
Part #: GD5F1GQ4RF9IGR
1.8v 1Gb SPI NAND WSON8*6mm pa