iC-DN Lowside Switch

MFG Part #:

iC-DN UDFN6-1.8x2

Part #:
Short Lead Time
RoHS Status:
Unit Price:$1.25
Minumum Qty: 3000
Need a lower quantity?
Ask a Question
Call Me
Email This Page

Product Information

Back to top
iC-DN is a monolithic lowside switch for ohmic, inductive and capacitive loads.

Designed for a wide input voltage range of 4 to 36 V, it is capable of supplying a minimum output current of 200 mA. The output acts as a current source with a low saturation voltage; protection against short-circuiting is provided by the  device shutting down with excessive temperature. The chip is activated when the input voltage threshold V(PI)−V(NI) of typically 3.5 V is exceeded.

With four leads, the input (PI, NI) and output (DN, VN) reference voltages are decoupled. The maximum permissive voltage difference between NI and VN is 36 V

Symmetry Electronics is an authorized iC-Haus distributor.


Back to top
36 V lowside switch/level shifter
Decoupling of input and output reference voltages permits control by 5 V logic
200 mA of output current
Short-circuit protected
Output with an active free-wheeling circuit
On-chip over-temperature protection with hysteresis
4 to 36 V input voltage range
Input with hysteresis
Wide temperature range of -40 to 120 C

Previously Viewed Products

iC-DN Lowside Switch
Part #: iC-DN UDFN6-1.8x2
iC-DN Lowside Switch