The iC-DX / iC-DXC are monolithic switches for ohmic, inductive and capacitive loads. The supply voltage VB of the devices can range from 8 to 30 V and has integrated reverse polarity protection.
The operational output source/sink-current is up to 150 mA for the iC-DX and up to 200 mA for the iC-DXC with maximum saturation voltages of 2 V. Their short circuit currents are limited to 450 mA. With input OE on high level state, the output works as a push-pull driver controlled by input IN. If IN is set either to high or low level, the output acts as a high-side (PNP) or low-side (NPN) driver which is activated by a high logic level on input OE. Output transitions are slew-rate limited to minimize interference (on lines). The devices are short circuit protected by shutting down with excessive temperature. A regulated 5 V power supply is available at pin VOUT to supply external circuitry with up to 10 mA.
The iC-DXC additional features a feedback path of the state of output pin OUT. Forcing OUT externally from its current state is signalled at pin MON. This can be used to implement an IO-Link Wake-Up detection.
• Digital sensors
• Light barriers
• Proximity switches
Symmetry Electronics (and its e-commerce division: SemiconductorStore.com) is an authorized iC-Haus distributor.