The iC-DX3 is a monolithic switch capable of driving ohmic, inductive and capacitive loads and features integrated reverse polarity protection. The supply voltage VB of the device can range from 8 to 30 V.
Output source/sink-current is at least 150 mA, with saturation voltages of typically 2 V.
With input OE on high level state, the output works as a push-pull stage under control of pin IN. If pin IN is set either to high or low level, the output acts as a high-side (PNP) or low-side (NPN) driver which is activated by a high logic level on input OE.