3.3V Uniform Sector Dual and Quad Serial Flash

Manufacturer:
MFG Part #:

GD25VE32CSIGR

Part #:
GD25VE32CSIGR
Availability:
Short Lead Time
RoHS Status:
Unit Price:$0.50
Qty:
Minumum Qty: 2000
Need a lower quantity?
Ask a Question
Call Me
Email This Page
 
 

Product Information

Back to top
The GD25Q32C(32M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#) and I/O3 (HOLD#). The Dual I/O data is transferred with speed of 240Mbits/s and the Quad I/O & Quad Output data is transferred with speed of 480Mbits/s.

1. FEATURES
♦ 32M-bit Serial Flash - 4096K-byte - 256 bytes per programmable page 
♦ Standard, Dual, Quad SPI - Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD# - Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD# - Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3 
♦ High Speed Clock Frequency - 120MHz for fast read with 30PF load - Dual I/O Data transfer up to 240Mbits/s - Quad I/O Data transfer up to 480Mbits/s - Continuous Read With 8/16/32/64-byte Wrap 
♦ Software/Hardware Write Protection - Write protect all/portion of memory via software - Enable/Disable protection with WP# pin - Top or Bottom, Sector or Block selection 
♦ Cycling endurance - Minimum 100,000 Program/Erase Cycles 
♦ Data retention - 20-year data retention typical. Note: (1) Please contact ELM for details. 
♦ Program/Erase Speed - Page Program time: 0.6ms typical - Sector Erase time: 50ms typical - Block Erase time: 0.15/0.25s typical - Chip Erase time: 15s typical 
♦ Flexible Architecture - Sector of 4K-byte - Block of 32/64K-byte  
♦ Low Power Consumption - 20mA maximum active current - 5μA maximum power down current 
♦ Advanced Security Features(1) - 3×1024-Byte Security Registers With OTP Locks - Discoverable parameters(SFDP) register 
♦ Single Power Supply Voltage - Full voltage range: 2.7~3.6V 
♦ Package Information - SOP8 (208mil) - WSON8 (6×5m
 

Documents

Back to top
Datasheet

Previously Viewed Products