The device iC-NH is used to condition digital signals when driving microprocessors, bus-oriented receivers and transmitters.
The 8 inverting drivers are divided into 2x4 bits (nibbles). The Schmitt trigger inputs accept standard CMOS levels and, due to the hysteresis, ensure a high signal-to-noise voltage ratio. They are capable of transforming slowly changing and noisy input signals into sharply defined output logic levels.
The garanteed push-pull driving capability is ±6mAdc at low saturation voltage. The push-pull drivers are designed for TTL/CMOS compatible output levels. High levels at the enable inputs 1NG and 2NG switch the output driver stages to the Tri-State mode.
Clamping diodes to VCC and to GND protect all inputs and outputs against damage due to ESD.]
• 8-Bit input port to drive microprocessors, bus-oriented receivers and transmitters
Symmetry Electronics (and its e-commerce division: SemiconductorStore.com) is an authorized iC-Haus distributor.