1. Interface
  2. Interface - Specialized
  1. Power Management
  2. Power Drive ICs High/Low Side

Lowside Switch

Manufacturer:

MFG Part #:

iC-DN SOT23-6L

Part #:
IC-DNSOT23-6L
Availability:
Short Lead Time
RoHS Status:
RoHS Compliant
Unit Price:$1.25
Qty:
Minumum Qty: 3000
Need a lower quantity?
Add To WishList
Ask a Question
Call Me
Email This Page
 
Product Information Features Documents
 

Product Information

Back to top
iC-DN is a monolithic lowside switch for ohmic, inductive and capacitive loads. Designed for a wide input voltage range of 4 to 36 V, it is capable of supplying a minimum output current of 200 mA. The output acts as a current source with a low saturation voltage; protection against shortcircuiting is provided by the device shutting down with excessive temperature. The chip is activated when the input voltage threshold V(PI)-V(NI) of typically 3.5 V is exceeded. With four leads, the input (PI, NI) and output (DN, VN) reference voltages are decoupled. The maximum permissive voltage difference between NI and VN is 36 V.
 

Features

Back to top
200 mA of output current
36 V lowside switch/level shifter
3-pin configuration possible
4 to 36 V input voltage range
Decoupling of input and output reference voltages (SOT23-6L) permits control by 5V logic
Input with hysteresis
On-chip over-temperature protection with hysteresis
Output with an active freewheeling circuit
Package option on request: (SC59-3L, CSP, DFN)
Short-circuit protected
Wide temperature range of -40 to 120 C
 

Previously Viewed Products

Lowside Switch
Part #: iC-DN SOT23-6L
Lowside Switch