NRF9E5-Multiband 433/868/915MHz Wireless Transceiver with Embedded MCU and ADC

Manufacturer:
MFG Part #:

NRF9E5-REEL

Part #:
NRF9E5-REEL
Availability:
In Stock
RoHS Status:
Unit Price:$2.60
Qty:
Minumum Qty: 1

Ask a Question
Call Me
Email This Page
 
 

Product Information

Nordic Semiconductor's nRF9E5 Multiband Wireless Transceiver is a true single chip system with fully integrated RF transceiver, 8051 compatible microcontroller and a 4 input 10bit 80ksps AD converter. The nRF9E5 wireless transceiver of the system supports all the features available in the nRF905 chip including ShockBurst™, which automatically handles preamble, address and CRC. The circuit has embedded voltage regulators, which provides maximum noise immunity and allows operation on a single 1.9V to 3.6V supply. The nRF9E5 wireless transceiver is compatible with FCC standard CFR47 part 15 and ETSI EN 300 220-1.
 

Features

nRF905 433/868/915MHz transceiver
8051 compatible microcontroller
4 input, 10bit 80ksps ADC
Suitable for frequency hopping
Carrier Detect for "listen before transmit protocol"
Extremely low cost Bill of Material (BOM)
Internal VDD monitoring
2.5A standby with wakeup on timer or external pin
Adjustable output power up to 10dBm
Channel switching time less than 650s
Low TX supply current, typical 11mA @-10dBm
Low RX supply current, typical 12.5mA peak
Low MCU supply current, typ. 1mA at 4MHz @3volt
Single 1.9V to 3.6V supply
Close integration of RF, 8051 MCU, ADC and peripherals
Ready made SW and HW examples available
Small 32 pin QFN (5x5mm) package
 

Specifications

Adaptive Frequency Hopping
N
Antenna - External
N
Antenna - Internal
N
Auto Acknowledge
N
Data Rate
50 kbps
Digital Interface Options
SPI
Error Handling
CRC
FCC Certified
N
Frequency
433,868,915 Mhz
Modulation Method
GFSK
Operating Temp
-40 to 85 C
Pin Count
32
Protocol
Proprietary
RF Output Power
10 dBm
Rx Sensitivity
-100 dBm
VDD Max
3.6 V
VDD Min
1.9 V
 

Documents