HAL566UA-E Hall Switch Unipolar Inverted High Sensitivity TO92UA

Manufacturer:
MFG Part #:

HAL566UA-E-2-B-1-00

Part #:
HAL566UA-E
Family:
Availability:
Short Lead Time
RoHS Status:
End Of Life:
3/31/2021
 
This item is currently not available for purchase online.

Please call us at 877-466-9722 to request a quote.

Ask a Question
Call Me
Email This Page
 
 

Product Information

This sensor family consists of different two-wire Hall switches produced in CMOS technology. All sensors change the current consumption depending on the external magnetic field and require only two wires between sensor and evaluation circuit. The sensors of this family differ in the magnetic switching behavior and switching points.
 
The sensors include a temperature-compensated Hall plate with active offset compensation, a comparator, and a current source. The comparator compares the actual magnetic flux through the Hall plate (Hall voltage) with the fixed reference values (switching points). Accordingly, the current source is switched on (high current consumption) or off (low current consumption). The active offset compensation leads to constant magnetic characteristics in the full supply voltage and temperature range. In addition, the magnetic parameters are robust against mechanical stress effects.
 
The sensors are designed for industrial and automotive applications and operate with supply voltages from 4 V to 24 V in the junction temperature range from –40 °C up to 100 °C. All sensors are available in the SMD-package SOT89B-1 and in the leaded versions TO92UA-1 and TO92UA-2.
 

Features

Current output for two-wire applications
Junction temperature range from 40 C up to 140 C.
Operates from 4 V to 24 V supply voltage
Operates with static magnetic fields and dynamic magnetic fields up to 10 kHz
Switching offset compensation at typically 145 kHz
Overvoltage and reverse-voltage protection
Magnetic characteristics are robust against mechanical stress effects
The decrease of magnetic flux density caused by rising temperature in the sensor system is compensated by a built-in negative temperature coefficient of the magnetic characteristics
Constant magnetic switching points over a wide supply voltage range
Ideal sensor for applications in extreme automotive and industrial environments
EMC corresponding to ISO 7637
 

Specifications

ABS
N
Brushless DC Motors
N
Configuration
2-Wire
Direction Detection
N
Ignition Timing
N
Magnetic B OFF
5.9 mT
Magnetic B ON
2.9 mT
Multiple Magnets
N
Package
TO92
Position and End Detection
Y
Rotating Speed
N
RPM Measurement
Y
Solid State Switch
N
Temp Range
-40 to 100 C
Unipolar Inverted
H
Window Lifter
N
 

Documents

Micronas Product Brief
Micronas Product Selection Guide
Micronas RoHS Certification

Previously Viewed Products