Non Isolated PoE PD solution 5V DC output inc adj Class

MFG Part #:


Part #:
Short Lead Time
End Of Life:
Unit Price:$9.23
Minumum Qty: 1000
Need a lower quantity?
Ask a Question
Call Me
Email This Page

Product Information

Back to top
The Ag8000 series of modules are designed to extract power from a conventional twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af Power-over-Ethernet (PoE) standard. IEEE 802.3af allows for two power options for Category 5 cables and the Ag8000 series have two pairs of power inputs pins: - VA1&2 and VB1&2 to accommodate this, see Figure 1. The Ag8000 signature and control circuit provides the PoE compatibility signature and power classification required by the Power Sourcing Equipment (PSE) before applying up to 15W power to the port. The Ag8000 is compatible with Class 0 to Class 3 equipment. The high efficiency DC/DC converter operates over a wide input voltage range and provides a non-isolated regulated low ripple and low noise output. The DC/DC converter also has built-in output overload, output short-circuit and over-temperature protection.


Back to top
IEEE802.3af compliant
Small package size - 56mm (L) x 14mm (H)
Low output ripple and noise
Input voltage range 36V to 60V
Only one low cost external decoupling capacitor required
Overload and short-circuit protection
Adjustable Output - 3 product variants cover all voltages from 2.4V to 13V
Thermal Cut Off
High efficiency DC/DC converter
Silvertel design-in assistance


Back to top
Device Type
IEEE 802.3af Compliant
Input Voltage Max
60 V
Input Voltage Min
36 V
Output Power Max (W)
6 W
Output Voltage Max
7.5 V
Output Voltage Min
2.5 V
PoE Version


Back to top
Silvertel Application Note
Silvertel Application Note
Silvertel AG800 Datasheet

Previously Viewed Products