Trinamic QSH4218 QMot Stepper Motor w/42mm Flange (0.49 Nm)

MFG Part #:


Part #:
Short Lead Time
RoHS Status:
Unit Price:$50.95
Minumum Qty: 1
Ask a Question
Call Me
Email This Page

Product Information

Back to top
These two phase hybrid stepper motors are optimized for microstepping and give a good fit to the TRINAMIC family of motor controllers and drivers. They are all used in the 42mm PANdrive™ family. The QSH4218-35-10-027, QSH4218-41-10-035 and QSH4218-51-10-049 are motors with 1A RMS coil current.  The Trinamic QSH4218-47-28-40 is different: It is designed for 2.8A RMS coil current to provide maximum torque at high velocities. However the motor has the same mechanical dimensions as the Trinamic QSH4218-51-10-049.


Back to top
NEMA 17 mounting confi guration
flange max. 42.2mm * 42.2mm
5mm axis diameter, 20mm length
Step angle: 1.8˚
optimized for microstep operation
optimum fit for TMC236 / TMC246 based driver circuits
up to 40V operating voltage
4 wire connection
neodymium magnets for maximum torque


Back to top
Product Brief

Previously Viewed Products