This evaluation board is suitable for use with all variants of the Ag2120
. It can be used on its own or it can be connected to an Ag117x evaluation board.
The Ag2120 evaluation board can be set at either +5V or +3V, the Ag2120 will work at either of these voltages.
The board has two device sockets, one for the single-in-line (SIL) and one for the dualin-line (DIL). Do not attempt to plug in both variant at the same time.
The evaluation board has two 25-way D-Type connectors (CN1 socket and CN2 plug) these can be used to connect this board to other evaluation boards. There is also an RJ11 connector J3 to connect the line and a power connector CN6 to connect to the power pack (included in the evaluation kit).
Below shows a basic set up using a single Ag2120 evaluation board connected to the line.