The Silvertel EVALAG2130 PoE evaluation board is suitable for use with Ag2130
. It can be used on its own or it can be connected to an Ag117x evaluation board. The Ag2130 module is included.
The Ag2130 evaluation board can be set at either +5V or +3V, the Ag2130 will work at either of these voltages.
The board has a single-in-line (SIL) device sockets for the single-in-line.
The evaluation board has two 25-way D-Type connectors (CN1 socket and CN2 plug) these can be used to connect this board to other evaluation boards. There is also an RJ11 connector CN3 to connect the line and a power connector CN6 to connect to the power pack (included in the evaluation kit only).
Figure 2 shows a basic set up using a single Ag2130 evaluation board connected to the line.