Evaluation Board iC-MA (incl. 2 samples)

Manufacturer:
MFG Part #:

iC-MA EVAL MA1D

Part #:
IC-MAEVALMA1D
Availability:
Short Lead Time
RoHS Status:
Unit Price:$72.50
Qty:
Minumum Qty: 1

Ask a Question
Call Me
Email This Page
 
 

Product Information

The CMOS device iC-MA consists of a quadruple hall sensor array which has been optimized for the magnetic measurement of angles of rotation. This array permits error-tolerant adjustment of the magnet, reducing assembly efforts. The integrated signal conditioning unit provides a differential sine/cosine signal at the output. The sensor generates one sine cycle per each full rotation of the magnet, enabling the angle to be clearly determined. At the same time the internal amplitude control unit produces an regulated output amplitude of 2Vpp regardless of variations in the magnetic field strength, supply voltage and temperature. Furthermore, signals are provided which enable the sensor amplitude to be assessed and also report any magnet loss. With the aid of the integrated 8-bit sine/digital converter the angle of rotation is determined from the sine/cosine signals. This is output via an incremental interface in a number of selectable resolutions. The zero angle is indicated by an index pulse. The maximum resolution of 8-bit is maintained up to rotations of 60,000 rpm. The absolute angle of rotation can be converted back to a linear analog output signal using the internal D/A converter; here, output voltage limits can be set as required using the external pins. Either a periodic linear signal (sawtooth) or a delta voltage (triangle) can be provided. iC-MA can be easily cascaded in three different modes of chain operation so that several axes of rotation can be scanned. The angle positions of the individual axes can then be read via a common bus. Used in conjunction with a permanent magnet iCMA can act as an encoder system with an integrated magnetic scanning feature. No further components are required.
 

Features

4 buffered I/O stages for signal outputs
Additional operating modes with reduced power consumption
Analog operation modes: - sine/cosine signals controlled to 2 Vpp - triange or sawtooth signal with selectable amplitude
Cascading of multiple iC-MA possible for chain operation
DFN10 package and bare die for flip chip mounting available
Digital operation modes: - A/B quadrature signals with Z index pulse - Counter pulses for external binary counters
Error signal output for detection of low magnetic field strength
Extended temperature range of -40...+125 C
Interpolator with a resolution of up to 256 angle steps per cycle
Non-sensitive to magnetic stray fields due to differential measurement technique
Quadruple hall sensor array for error-tolerant adjustment
Rotational speeds up to 60.000 rpm
Standby modus when not enabled
Three configuration inputs for operating mode selection
 

Previously Viewed Products