Development Kit for nRF24LE1 Low Power 2.4GHz Wireless Transceiver with 8051 MCU

Manufacturer:
MFG Part #:

NRF24LE1-F16Q32-DK

Part #:
NRF24LE1-Q32-DK
Availability:
Short Lead Time
RoHS Status:
Unit Price:$88.89
Qty:
Minumum Qty: 1

Ask a Question
Call Me
Email This Page
 
 

Product Information

Please consider the latest version - NRF52-DK or NRF52840-PDK
CUSTOMER MUST PURCHASE THE NRF6700 IN ORDER TO WORK The nRF24LE1 is supported by a comprehensive set of development tools. This includes being the first part to be compatible with the brand new Nordic Semiconductor nRFgo evaluation and development platform. At the core of this platform is the nRFgo Starter Kit (nRF6700) which provides a generic evaluation and development platform for all Nordic ULP 2.4GHz radios. The nRF24LE1 Development Kit complements the Starter Kit by including radio modules and a complete Software Development Kit (SDK). To get started with the nRF24LE1 designers need both a Starter Kit and a Development Kit. However, upcoming products from Nordic Semiconductor will also be compatible with the Starter Kit so users will only need to purchase the Development Kit relevant to these products in future. The nRFgo Starter Kit is an ideal platform for developing ULP applications. It includes two motherboards with standard sockets for Nordic radio modules, plus a rich set of standard interfaces and prototyping facilities. The motherboards also offer built-in support for the Nordic Semiconductor nRFProbe – a high-performance fully-featured hardware debug solution for Nordic radios with built in microcontrollers such as the nRF24LE1. The included nRFgo Studio PC software package also enables quick and easy RF evaluation and testing. The nRF24LE1 Development Kit comes in three variants, one for each package type. The SDK includes full support for Keil µVision IDE, including a plug-in for the nRFProbe hardware debugger. A library of Hardware Abstraction Layers and complete example applications makes it easy for firmware developers to take advantage of all the nRF24LE1’s advanced features.
 

Features

Fully featured ultra low power nRF24L01+ 2.4GHz transceiver core
Worldwide 2.4GHz ISM band operation
Enhanced ShockBurstTM hardware link layer
250 kbps, 1 Mbps and 2 Mbps on-air data rate options
Air compatible with nRF24L01; nRF24L01+; nRF24LU1, and nRF2401A, -02, -E1 and -E2
Low cost external+/-60ppm 16MHz crystal
Enhanced 8-bit 8051 compatible microcontroller
32-bit multiplication-division unit
AES encryption/decryption accelerator
16 kbytes on-chip flash memory
1 kbyte on-chip data flash memory
512 bytes high-endurance data flash memory
1 kbyte on SRAM plus 256 bytes of IRAM
Low power 16MHz crystal and RC oscillators
Ultra low power 32kHz crystal and RC oscillators
Flexible real-time counter and three 16-bit timers/counters
Ultra low power analog comparator for system wake-up
Rich set of digital interfaces including: SPI master/slave, 2-wire master/slave, and UART
2-channel PWM
Programmable resolution ADC: 6, 8, 10, or 12-bits
Random Number Generator based on thermal noise
Supports the Nordic nRFProbe hardware debugger
Programmable generic I/O pins
Three package options: 4x4mm 24-pin QFN (7 Generic I/O pins), 5x5mm 32-pin QFN (15 Generic I/O pins), 7x7mm 48-pin QFN (31 Generic I/O pins)
 

Specifications

Adaptive Frequency Hopping
N
Antenna - External
N
Antenna - Internal
N
Auto Acknowledge
N
Data Rate
2000 kbps
Digital Interface Options
SPI, UART
Error Handling
CRC
FCC Certified
N
Frequency
2400-2500 Mhz
Modulation Method
GFSK
Operating Temp
-40 to 85 C
Pin Count
32
Protocol
Proprietary
RF Output Power
0 dBm
Rx Sensitivity
-82 dBm
VDD Max
3.6 V
VDD Min
1.9 V
 

Documents

Datasheet
Product Brief

Previously Viewed Products