1. Wireless
  2. 2.4GHz
  1. Wireless
  2. Proprietary Wireless Protocol

NRF24LE1-Q32-T Low Power 2.4GHz Wireless Transceiver with 8051 MCU

Manufacturer:

MFG Part #:

NRF24LE1-Q32-T

Part #:
NRF24LE1-Q32-T
Availability:
In Stock
RoHS Status:
RoHS Compliant
Unit Price:$3.16
Qty:
Minumum Qty: 1
Add To WishList
Ask a Question
Call Me
Email This Page
 
Product Information Features Specifications Documents
 

Product Information

Back to top
(ULP) Ultra Low Power wireless SoC solution
The nRF24LE1 integrates a fully-featured nRF24L01+ 2.4GHz transceiver core including Nordic’s proven Enhanced ShockBurst™ hardware link layer. It delivers true ULP operation with peak currents low enough to run on coin cell batteries. The nRF24LE1 also integrates an enhanced 8051 mixed signal MCU core featuring fewer clock cycles per instruction than legacy 8051 devices. Most instructions need just one or two clock cycles leading to an average performance improvement of 8X using the MIPS (Million Instructions Per Second) benchmark. This high performance combined with 16kbytes of on-chip flash plus 1kbyte of SRAM ensures the processing platform is powerful enough to run both the RF protocol stack and application layer with ease. 
 
A wide range of peripherals and power saving modes support the RF protocol stack. A ULP 32kHz crystal oscillator provides high accuracy timing for low report rate synchronous protocols and a 16MHz RC oscillator provides fast start-up times from idle. The 32kHz oscillator can provide timing accurate enough for higher report rate protocols without requiring an external crystal. A security co-processor supports AES encrypted wireless communication. 
 
The nRF24LE1 provides a range of nanoamp and microamp idle modes specifically designed for ULP RF protocol stacks. Further benefits include higher precision protocol timing, lower power consumption, and improved co-existence performance. For the application layer the nRF24LE1 offers a rich set of interfaces and peripherals including an SPI, 2-wire, UART, 12-bit ADC, PWM and an analog comparator. As such, the nRF24LE1 is the ideal single chip solution for wireless applications including mice, keyboards, remote controls, game controllers, sports/healthcare sensors, toys, and active RFID tags.  
 
The nRF24LE1 is available in three package options. The tiny 4x4mm 24-pin QFN option is by far the smallest ULP single chip power solution available today and provides 7 programmable generic I/O pins. For applications where more I/O pins are needed the nRF24LE1 is also available in a 5x5mm 32-pin QFN with 15 generic I/O pins, and a 7x7mm 48-pin QFN with 29 generic I/O pins.


Ordering Information:

Part Number Package Container MOQ
nRF24LE1-Q24-T 4×4mm 24-pin QFN, lead free (green) Tray 490
nRF24LE1-Q24-R 4×4mm 24-pin QFN, lead free (green) Tape-and-reel 4000
nRF24LE1-Q32-T 5×5mm 32-pin QFN, lead free (green) Tray 490
nRF24LE1-Q32-R 5×5mm 32-pin QFN, lead free (green) Tape-and-reel 4000
nRF24LE1-Q48-T 7×7mm 48-pin QFN, lead free (green) Tray 490
nRF24LE1-Q48-R 7×7mm 48-pin QFN, lead free (green) Tape-and-reel 4000












Development Tools:

Part Number Description
nRF6700 nRFgo Starter Kit
nRF24LE1-Q32-DK nRFgo Development Kit for nRF24LE1 5×5mm 32 pin QFN (requires nRFgo Starter Kit)
 

Features

Back to top
Fully featured ultra low power nRF24L01+ 2.4GHz transceiver core
Worldwide 2.4GHz ISM band operation
Enhanced ShockBurstTM hardware link layer
250 kbps, 1 Mbps and 2 Mbps on-air data rate options
Air compatible with nRF24L01; nRF24L01+; nRF24LU1, and nRF2401A, -02, -E1 and -E2
Low cost external+/-60ppm 16MHz crystal
Enhanced 8-bit 8051 compatible microcontroller
32-bit multiplication-division unit
AES encryption/decryption accelerator
16 kbytes on-chip flash memory
1 kbyte on-chip data flash memory
512 bytes high-endurance data flash memory
1 kbyte on SRAM plus 256 bytes of IRAM
Low power 16MHz crystal and RC oscillators
Ultra low power 32kHz crystal and RC oscillators
Flexible real-time counter and three 16-bit timers/counters
Ultra low power analog comparator for system wake-up
Rich set of digital interfaces including: SPI master/slave, 2-wire master/slave, and UART
2-channel PWM
Programmable resolution ADC: 6, 8, 10, or 12-bits
Random Number Generator based on thermal noise
Supports the Nordic nRFProbe hardware debugger
Programmable generic I/O pins
Three package options: 4x4mm 24-pin QFN (7 Generic I/O pins), 5x5mm 32-pin QFN (15 Generic I/O pins), 7x7mm 48-pin QFN (31 Generic I/O pins)
 

Specifications

Back to top
Adaptive Frequency Hopping
N
Antenna - External
N
Antenna - Internal
N
Auto Acknowledge
N
Data Rate
2000 kbps
Digital Interface Options
SPI, UART
Error Handling
CRC
FCC Certified
N
Frequency
2400-2500 Mhz
Modulation Method
GFSK
Operating Temp
-40 to 85 C
Pin Count
32
Protocol
Proprietary
RF Output Power
0 dBm
Rx Sensitivity
-82 dBm
VDD Max
3.6 V
VDD Min
1.9 V
 

Documents

Back to top
Datasheet
Datasheet

Previously Viewed Products

NRF24LE1-Q32-T Low Power 2.4GHz Wireless Transceiver with 8051 MCU
Part #: NRF24LE1-Q32-T
NRF24LE1-Q32-T Low Power 2.4GHz Wireless Transceiver with 8051 MCU