Full HD FIFO (First-In-First-Out) Memory

MFG Part #:

AL460A-7-PBF

Part #:
AL460A-7-PBF
Availability:
Short Lead Time
RoHS Status:
End Of Life:
3/2/2017
Unit Price:$29.00
Qty:
Minumum Qty: 1
Ask a Question
Call Me
Email This Page
 
 

Product Information

Back to top

This product has been discontinued by the manufacturer. See attached Product Change Notification below in the "Documents" section.

It is recommended to use AL462B-7 as a replacement. Click here to purchase the replacement part (AL462B-7).

The AL460 consists of 128Mbit of memory density, and is configured as 8,192K x 16 bits FIFO (First-In-First-Out), the optimized access scheme offers maximum R/W operating speed up to 150 MHz. The FIFO provides simple and easy-to-use user interfaces facilitating usage in a wide range of applications, such as Multimedia systems, video capture systems, and various video data buffering applications.

The extensive memory size and high data-access-speed allow video frame capturing up to Full HD (1080p) resolution. Complementing the Double Buffer mode, 2 banks serve as upper and lower banks (with 4,096k x 16-bit of each bank), AL460 can be further manipulated into more sophisticated applications. The R/W operations of corresponding banks are acknowledged while high/low signals present at the bank control pins.

All AL460 FIFO specifics, like completely independent input and output controls, built-in address and pointer control circuits, bank switching and other management tasks provide data integrity during access and straightforward bus interface for a sequential data read/write that reduce inter-chip design efforts.

The Double-Buffer mode allocates video data capture without reading a mixed old and new data frames. The polarity control seamlessly matches the controller waveform without additional glue-logic.
AL462B-7 
 

Features

Back to top
128Mbit density configured as 8M x 16-bit input and output data bus width
Supports NTSC, PAL and HDTV up to 1080p resolutions
Independent 16-bit read/write data bus operations (different I/O data rates acceptable)
High speed synchronous sequential access in maximum speed 150Mhz
Input/Output enable control
Supports double buffer mode (Upper and Lower frame access with 4M x16-bit in each frame) via frame select pins
Polarity Selectable
2.5V and 3.3V power supply
Standard LQFP-128 package
 

Documents

Back to top
Datasheet
Product Change Notification
Averlogic Technologies Supporting Documents

Previously Viewed Products