802.11 abgn (dual band: 2.4 GHz & 5 GHz) Wi-FI IO Module, Integrated Antenna, Embedded TCP/IP Stack, SPI Interface (UART Interface)

Manufacturer:
MFG Part #:

RS9110-N-11-26-01

Part #:
RS9110N11-26-01
Availability:
Short Lead Time
 
This item is currently not available for purchase online.

Please call us at 877-466-9722 to request a quote.

Ask a Question
Call Me
Email This Page
 
 

Product Information

The RS9110-N-11-26 module from Redpine’s Connect-io-n™ family of products is a complete dual band (2.4/5 GHz) IEEE 802.11abgn based wireless device server that directly provides a wireless interface to any equipment with a serial or SPI interface for data transfer. It integrates a MAC, baseband processor, dual band RF transceiver with power amplifier and diplexer, frequency reference and antenna or antenna connector; and all WLAN protocol and configuration functionality, networking stack, and HTTP server in embedded firmware to make an 802.11n WLAN solution for a variety of applications. No WLAN, configuration or networking functionality is required on the host system or data source. Based on the Redpine Signals’ RS9110 SoC that includes an embedded processor, it is designed to provide standards compliant wireless connectivity with enterprise-level security to devices and systems such as industrial equipment, medical electronic systems, POS equipment, sensor networks and metering equipment, M2M communications, and remote configuration applications. As a wireless serial modem, the RS9110-N-11-26 originates and terminates TCP and UDP connections, enabling a variety of M2M applications at low cost and small footprint. It uniquely provides connectivity in the single stream 802.11n mode, preserving overall network throughput in the emerging enterprise environments.

 

Features

Compliant to 802.11b/g and single stream 802.11n
2.4/5 GHz, 802.11n RF transceiver with power amplifier
Highly integrated 2.4 GHz/5 GHz transceiver with direct conversion architecture
Fully self-contained serial-to-wireless functionality - does not require any host processor bandwidth
Includes all the protocol and configuration functions required for WLAN connectivity in open and WPA/WPA2-PSK secure modes of operation
Payload data through Serial Interface and SPI
Terminates TCP and UDP connections, and offers transparent serial modem functionality
Configuration through UART or wireless means
Bluetooth Coexistence support
Ultra low power operation with power save modes
Ad-hoc and infrastructure modes for maximum deployment flexibility
Single supply 3.1 to 3.6 V operation
 

Specifications

Adaptive Frequency Hopping
Y
Antenna
Embedded
Auto Acknowledge
N
Data Rate
65 Mbps
Embedded Stack
WLAN, TCP/IP
FCC Certified
Y
Frequency
2.4GHz, 5GHz
Host Interface
SPI
Modulation Method
OFDM w/BPSK, QPSK, 16-QAM, 64-QAM
Operating Temp
-40 to 85 °C
Pin Count
52
Protocol
Wi-Fi
VDD Max
3.6 MAX V
VDD Min
3.6 MIN V
 

Documents

Product Brief