HDMI 1.3 Transmitter: No HDCP, 24-bit RGB Input, 1080p@60Hz, 72-pin QFN

MFG Part #:


Part #:
In Stock
RoHS Status:
Unit Price:$3.48
Minumum Qty: 1
Ask a Question
Call Me
Email This Page

Product Information

Back to top
This product requires a signed NDA for the complete datasheet The SiI9022a is an ultra low-power HDMI® transmitter with greater integration and improved power characteristics for handheld consumer electronics devices such as mobile phones, cameras, portable media players and personal internet devices. Compliance
•HDMI 1.3
•Simplay HD
•DVI 1.0

Digital Video
•Integrated TMDS core
•DTV resolution support - upto 1080p
•PC resolution support - VGA/XGA/SXGA/WSXGA/UXGA
•Flexible interface to HD MPEG decoders:
     ◦ 12/24-bit RGB YCbCr 4:4:4
     ◦ 16/20/24-bit YCbCr 4:2:2
     ◦  8/10/12-bit YCbCr 4:2:2 (ITU-R BT.601 & BT.656)
•Integrated YCbCr —> RGB conversion
•4:2:2 —> 4:4:4 up-converter
•Programmable Data Enable (DE) generator
•HDMI 1.3 x.v.YCC metadata packet support

Consumer Electronic Control (CEC)
•Dedicated CEC signals
•Integrated hardware arbitration logic reduces local CPU overhead

Digital Audio
•DVD-Audio support via 1xI2S input (49-ball)
•DVD-Audio support via 4xI2S inputs (81-ball, 72-pin)
•Supports 2-channel 192kHz or 8-channel 96kHz
•Supports IEC60958 2-ch PCM or IEC61937 compressed audio (Dolby Digital, DTS, etc.)
•Industry-standard S/PDIF input
•MCLK not required for I2S and S/PDIF

System Operation
•Simplified API programming through Transmitter Programming Interface (TPI) and CEC Programming Interface (CPI)
•Programmable DDC controller simplifies system design
•Flexible interrupt registers with interrupt pin
•Monitor detection supported through hot plug and receiver sense

Power Management
•D3, D2, D0 ACPI power states supported

Available Packages
•81-ball BGA (4mm x 4mm, 0.4mm ball pitch)
•49-ball BGA (4mm x 4mm, 0.5mm ball pitch)
•72-pin QFN (10mm x 10mm)

Operating Range
•-20C° to +85C° extended temperature support


Back to top
HDMI 1.3 compliance
Integrated TMDS Core
Upto 1080p/60 DTV resolution support
Dedicated CEC signals
DVD-Audio support via I2S input
Simplified API programming through Transmitter Programming Interface (TPI) and CEC programming interface (CPI)
D3, D2, D0 ACPI power states supported
-20C to 85C extended temperature support


Back to top
Silicon Image Product Selection Guide

Previously Viewed Products