Starter kit for SiI1392: HDMI 1.2 Transmitter with SDVO input, HDCP 1.2

MFG Part #:

CP1392ADD2

Part #:
CP1392ADD2
Availability:
Short Lead Time
Unit Price:$250.00
Qty:
Minumum Qty: 1
Ask a Question
Call Me
Email This Page
 
 

Product Information

Back to top

This product requires a signed NDA

Starter kit for SiI1392

Silicon Image’s SiI1392 VastLane transmitter interfaces seamlessly to a variety of PC graphics sources to support DVI and HDMI™ displays with resolutions up to UXGA or 1080p. The built-in High-bandwidth Digital Content Protection (HDCP) engine secures the digital link for transmission of valuable HD video and audio. These transmitters are preprogrammed with unique HDCP keys, providing state-of-the-art security while reducing manufacturing complexity and cost.

Industry-Standard Compliance
• HDMI 1.2
• HDCP 1.2
• DVI 1.0
• SDVO 1.2
• EIA/CEA-861B

Digital Video Inputs

• SDVO (200MHz)
• Integrated RGB <—> YCbCr color space conversion
• 4:4:4 <—> 4:2:2 converter

Digital Video Outputs
• Integrated core supporting cables over 10 meters
• HDMI output: - 25-165 MHz - SiI1392CNU
• Supports DTV (480i -1080p) and PC (VGAUXGA) resolutions
• Integrated RGB <—> YCbCr color space conversion
• 4:4:4 <—> 4:2:2 converter

Digital Audio
• Supports 8 channels at 192 kHz (including DVD-Audio) through HD-Audio input
• Supports IEC60958 2-channel PCM or IEC61937 compressed audio (Dolby® Digital, DTS, etc.)
• Industry-standard HD-Audio, S/PDIF inputs

Content Protection
• Integrated HDCP cipher engine
• HDCP repeater function support with on-chip SHA-1 logic for high security
• Pre-programmed HDCP keys - Simplify manufacturing process - Most secure solution available - Lower system, manufacturing costs
• Encrypts both video and audio

System Operation
• Advanced technology for synchronizing video and audio streams without requiring direct communication between graphics and audio drivers
• Optional external microcontroller support for future enhancements
• 64-pin QFN package
• Dual I2C pass-through interfaces for host I2C access of EDID via DDC and configuration EEPROM using SDVO
• Flexible interrupt registers with interrupt pin
• Monitor-detection support through hot plug and receiver detection

Power Management
• Low-power 1.8V core operation
• Low-power standby mode
• Flexible power-down modes

 

Features

Back to top
HDMI 1.2 industry-standard compliance
SDVO input (200MHz)
Integrated core supporting cables over 10 meters
Integrated HDCP cipher engine
Low-power 1.8V core operation
 

Documents

Back to top
Silicon Image Product Selection Guide
Silicon Image Product Selection Guide

Previously Viewed Products