8-Channel Active Photosensor Array

Manufacturer:
MFG Part #:

LSB8S 42-2048

Part #:
LSB8S42-2048
Availability:
Short Lead Time
RoHS Status:
Unit Price:$14.65
Qty:
Minumum Qty: 10
Need a lower quantity?
Ask a Question
Call Me
Email This Page
 
 

Product Information

Back to top
The iC-LSB sensor array, coming with 8 independent channels, is a general purpose optoelectronic scanner made to suit a variety of encoding applications, such as rotary and linear encoders used for motion control, robotics, power tools etc.

The sensor array features monolithically integrated photosensors with active areas of 800 µm x 300 µm
each in combination with fast on-chip photocurrent amplifiers, enabling an analog output at reasonable signal strength to the circuit board.

The highside current source output construction avoids a ground referenced signal and permits the subsequent electronics to adjust the gain. In its simplest form this is done by load resistors, for instance.

The spectral sensitivity range includes visible to near infrared light, with the maximum sensitivity being close to a wavelength of 700 nm.

Output currents of up to 50 µA are supplied under low light conditions, for instance when illuminated at only 3 µW/mm² by an 850 nm LED. The photocurrent gain is 46 dB typically.

iC-Haus iC_LSB_001

Applications:
• Optical position encoding from analog sine/cosine signals
• Incremental encoders with index signal

Symmetry Electronics (and its e-commerce division: SemiconductorStore.com) is an authorized iC-Haus distributor.
 

Features

Back to top
Monolithic array of independent photosensors with excellent matching
Compact photosensor size of 800 m x 300 m enabling high-quality encoder scanning at reduced system dimensions
Narrow track pitch of 0.42 mm cuts down illumination efforts
Enhanced EMI immunity due to on-chip pre-amplification
Dark current compensation permits high temperature operation
Open-collector outputs as highside current source
Simple gain setting and current-to-voltage conversion by external load resistors
Single supply operation from 4 V to 5.5 V
Low power consumption
Space saving, RoHS compliant optoQFN and optoBGA packages
Options: extended temperature range of -40 to 125 C, customized COB modules, reticles and code discs
 

Previously Viewed Products

8-Channel Active Photosensor Array