WiFi-IT Evaluation and Development Kit - Standard Version (EDK)

Manufacturer:

North Pole Engineering Manufacturer North Pole Engineering

MFG Part #:

EDK

Part #:
EDK
Availability:
Short Lead Time
RoHS Status:
Unit Price:$995.00
Qty:
Minumum Qty: 1
Ask a Question
Call Me
Email This Page
 
 

Product Information

Back to top

The standard version of the WiFi-IT! EDK is specially designed to evaluate and develop wireless embedded sensor and control applications using the WiFi-IT! WL11 and WL10 modules.

The EDK can be configured to support all of the WiFi-IT! module features and operating environments. Standard .1 inch center connectors are provided for monitoring all interface signals, voltages and clocks. Each interface signal is connected to an LED monitor through the Logic Engine. The Logic Engine drives the LEDs according to the module output signal level and in the case of pulsed or clocked outputs, displays a blinking LED to indicate changing signal levels. In many cases, the Logic Engine can replace the need to monitor signals with an oscilloscope. It can also be used to give a quick confirmation that a WiFi-IT! module has been correctly programmed for a given task.

The EDK board can be used to develop OEM hardware that is directly controlled by a WiFi-IT! module or uses the module for wireless communication. The OEM designed device is connected through a reverse mating connector to a WiFi-IT! module on the EDK. When the OEM system is completely verified the OEM PCB and WiFi-IT! plug directly into each other!

The EDK Standard contains:

    • Standard version of WiFi-Basic
    • Full Integrated Development Environment
    • Development Board with On-board LED Signal Monitoring
    • Two WL11-IP WiFi-IT! modules
    • One pre-configured Wi-Fi access point
    • All cables and power connectors
    • 3 months of support through the NPE 4-Hour Response Support Forum

     

  •  

    Features

    Back to top
    All signal pins easily accessible
    LED signal monitoring - removes the need for an oscilloscope
    OEM Connector for hardware development and debug
    USB port for downloading code
    Two alarm input switches
    Breadboard work area
    Operates with the GainSpan/Green Hills development environment
    On-board diagnostics and JTAG port
    Power supply and cables included
     

    Documents

    Back to top
    EDK vs. EDK+ Features Guide
    User Manual