xPico Wi-Fi 802.11 b/g/n Device Server Extended Temp - Bulk

Manufacturer:
MFG Part #:

XPW100100B-01

Part #:
XPW100100B-01
Family:
Availability:
In Stock
RoHS Status:
Unit Price:$23.03
Qty:
Minumum Qty: 1

Ask a Question
Call Me
Email This Page
 
 

Product Information

Reduce your development costs, shorten your time to market, and leverage mobile solutions with the Lantronix® xPico® Wi-Fi® family of embedded device servers. It is one of the world's smallest and most flexible Wi-Fi® device servers. xPico Wi-Fi is a state-of-the-art member of the xPico family, providing low power, Soft AP, and simultaneous client mode, full IP and WLAN stacks. The xPico Wi-Fi module is a complete device server suitable for mobile M2M applications and includes industry best 5-year warranty.
    
XPW100100B-01
 

Features

Wireless LAN Interface
IEEE 802.11 b/g and IEEE 802.11n (single stream) WLAN interface (2.4 GHz only)
IEEE 802.11 d/h/i/j/k/w/r
WPS 2.0 support
u.FL connector for external antenna
Serial Interface
Two Serial CMOS Ports (3.3V, 5V tolerant)
300 to 921.6 Kbps
Flow control XON/XOFF, RTS/CTS (SPort 1 only)
Lantronix tunneling application
ModBus TCP, Modbus ASCII, Modbus RTU
Host Interface
Dual Serial Port, SPI, USB 2.0 (device)
8 GPIO
Network Protocols
TCP/IP, UDP/IP, DHCP, ARP, ICMP, DHCP, Auto-IP, DNS, SNMPv1, TFTP
Networking Capabilities
Soft Access Point with DHCP Server
Lantronix SmartRoam Technology continually tracks Wi-Fi signal strength within range, along with preauthentication and caching resulting in smooth and automatic transition to access points without delay
QuickConnect: Dynamic Profiles facilitate easy and rapid connections to access points
Management and Control
Web Server - Landing Page
CLI (Serial Monitor Port), Telnet
XML import and Export (XCR)
Field upgradable firmware (OTA)
Security
IEEE 802.11i Support WPA-Personal, WPA2-Personal
256-bit AES Encryption
Architecture
ARM Cortex M3 class processor with on-chip Flash and SRAM
1MB Flash and 128 KB SRAM
SPI Flash stores
Included Software
MS Windows-based DeviceInstaller
MS Windows-based Com Port Redirector
Power
Input Voltage: 3.3VDC
Low power consumption of approximately 20A standby
Physical Interface
40-pin Board-to-Board SMT Connector
Environmental
Operating Temp: -40 to +85 C
Storage Temp: -40 to +85 C
Relative Humidity: 0% to 90% non-condensing
Certifications
FCC Class B, UL and EN EMC
Packaging
Dimensions: 24mm (L) x 16.5mm (W) x 5.64mm (H)
Weight: 2.5g
Warranty
5-Year Limited
 

Previously Viewed Products